MEM-CO Barbed Tee: 5/32 in ID x 5/32 in ID x 5/32 in ID Size, Barbed x Barbed x Barbed
The MEM-CO Barbed Tee is a standard brass barbed tube fitting with a 5/32 in ID x 5/32 in ID x 5/32 in ID size, configured as Barbed x Barbed x Barbed. This brass fitting (MPN T4) is suitable for joining three tubes…
SKU 3G-OTH-476702
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Tee is a standard brass barbed tube fitting with a 5/32 in ID x 5/32 in ID x 5/32 in ID size, configured as Barbed x Barbed x Barbed. This brass fitting (MPN T4) is suitable for joining three tubes of equal inner diameter in pneumatic or fluid-handling systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a MEM-CO Barbed Tee used for?
The MEM-CO Barbed Tee (MPN T4) is a brass fitting used to join three tubes of equal 5/32 in ID in pneumatic or fluid-handling systems. It is commonly applied in air lines, lubrication circuits, and low-pressure fluid transfer where a reliable, leak-resistant branch connection is needed.
What are the specifications of the MEM-CO Barbed Tee T4?
The MEM-CO Barbed Tee T4 is a standard brass barbed tube fitting with a 5/32 in ID x 5/32 in ID x 5/32 in ID size and Barbed x Barbed x Barbed configuration. It is made of brass and carries the manufacturer part number T4. This fitting is designed for equal-diameter tube connections.
Where to buy MEM-CO Barbed Tee T4 worldwide?
3G Electric supplies the MEM-CO Barbed Tee T4 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source and deliver genuine MEM-CO fittings for pneumatic and fluid systems across all regions.
How to install a MEM-CO Barbed Tee?
To install a MEM-CO Barbed Tee, cut the tube ends square, push each tube fully onto the barb until seated, and secure with a hose clamp if required for higher pressure. Ensure the tube ID matches the 5/32 in barb size. No thread sealant is needed for barbed connections.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
