MEM-CO Barbed Fitting Adapter: 1/4 in Pipe x 5/32 in ID Size, Threaded x Barbed
The MEM-CO Barbed Fitting Adapter is a standard brass barbed tube fitting with a threaded x barbed, beaded barb design. It connects 1/4 in pipe to 5/32 in ID tubing, identified by manufacturer part number 4-28B3-1/2.
SKU 3G-OTH-476531
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Adapter is a standard brass barbed tube fitting with a threaded x barbed, beaded barb design. It connects 1/4 in pipe to 5/32 in ID tubing, identified by manufacturer part number 4-28B3-1/2.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Adapter used for?
The MEM-CO Barbed Fitting Adapter connects 1/4 in pipe to 5/32 in ID flexible tubing in pneumatic, fluid transfer, and instrumentation systems. Its threaded x barbed, beaded brass design provides a secure, leak-resistant joint for low-pressure air, water, or oil lines across industrial departments.
What are the specifications of the MEM-CO 4-28B3-1/2?
The MEM-CO 4-28B3-1/2 is a standard brass barbed fitting adapter with a threaded x barbed, beaded barb configuration. It has a 1/4 in pipe connection on one end and a 5/32 in ID barb on the other. The material is brass, and the type is threaded x barbed.
Where to buy MEM-CO barbed fittings in worldwide?
3G Electric supplies MEM-CO barbed fittings like the 4-28B3-1/2 to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this brass adapter.
How to install a MEM-CO threaded x barbed brass adapter?
Apply thread sealant to the 1/4 in NPT male threads and tighten into the female port. Push the 5/32 in ID tubing fully onto the beaded barb until seated. For a secure grip, use a hose clamp on the barb if system pressure exceeds 1.5 bar. Always verify tubing compatibility with the fluid.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
