MEM-CO Barbed Fitting Elbow: 1/4 in Pipe x 1/16 in ID Size, Threaded x Barbed
The MEM-CO Barbed Fitting Elbow (MPN 4-28LB1) is a standard brass barbed tube fitting with a threaded x barbed, beaded barb design. It connects 1/4 in pipe to 1/16 in ID tubing. 3G Electric interprets your demand for…
SKU 3G-OTH-476539
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow (MPN 4-28LB1) is a standard brass barbed tube fitting with a threaded x barbed, beaded barb design. It connects 1/4 in pipe to 1/16 in ID tubing. 3G Electric interprets your demand for this OEM-specified fitting, sources it across 14 industrial departments, and supports with specialist depth in controls and fluid handling.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Elbow 4-28LB1 used for?
The MEM-CO Barbed Fitting Elbow 4-28LB1 connects 1/4 in pipe to 1/16 in ID tubing in low-pressure fluid or pneumatic systems. Its threaded x barbed, beaded brass design provides a secure, leak-resistant joint in instrumentation, control panels, and general industrial plumbing applications.
What are the specifications of the MEM-CO 4-28LB1 barbed fitting?
The MEM-CO 4-28LB1 is a standard brass barbed tube fitting elbow. It has a 1/4 in pipe thread on one end and a 1/16 in ID beaded barb on the other. The connection type is threaded x barbed, and the material is brass. The manufacturer part number is 4-28LB1.
Where to buy MEM-CO barbed fittings in worldwide?
3G Electric supplies the MEM-CO 4-28LB1 barbed fitting elbow to worldwide customers. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source this OEM-specified fitting across 14 departments, including fluid handling and controls.
How to install a MEM-CO barbed fitting elbow?
To install the MEM-CO 4-28LB1, apply thread sealant to the 1/4 in pipe thread and tighten into the female port. Push the 1/16 in ID tubing fully onto the beaded barb until seated. For brass fittings, avoid over-tightening to prevent cracking. Always depressurize the system before installation.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
