MEM-CO Barbed Fitting Adapter: 1/8 in Pipe x 3/8 in ID Size, MBSPT x Barbed, Brass
The MEM-CO Barbed Fitting Adapter is a standard brass barbed tube fitting with a 1/8 in MBSPT pipe thread and a 3/8 in ID beaded barb. This MBSPT x Barbed, Brass, Beaded Barb adapter (MPN 1/8BSPT-B8) provides a…
SKU 3G-OTH-476610
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Adapter is a standard brass barbed tube fitting with a 1/8 in MBSPT pipe thread and a 3/8 in ID beaded barb. This MBSPT x Barbed, Brass, Beaded Barb adapter (MPN 1/8BSPT-B8) provides a reliable connection point for tubing systems. 3G Electric interprets your demand for this MEM-CO fitting, sources it across our supply network, and supports your application with specialist expertise in pumps and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Adapter used for?
The MEM-CO Barbed Fitting Adapter connects 3/8 in ID tubing to a 1/8 in MBSPT threaded port. It is commonly used in pneumatic, hydraulic, and fluid transfer systems where a leak-resistant, brass beaded barb provides a secure tubing grip.
What are the specifications of the MEM-CO 1/8BSPT-B8?
This MEM-CO adapter has a 1/8 in MBSPT male pipe thread on one end and a 3/8 in ID beaded barb on the other. It is made of brass, with a beaded barb design for secure tubing retention. The manufacturer part number is 1/8BSPT-B8.
Where to buy the MEM-CO Barbed Fitting Adapter worldwide?
3G Electric supplies the MEM-CO Barbed Fitting Adapter to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us to order the 1/8BSPT-B8 or similar brass barbed fittings for your application.
How to install a MEM-CO brass barbed fitting?
To install, apply thread sealant to the 1/8 in MBSPT male thread and tighten into the port. Push the 3/8 in ID tubing fully onto the beaded barb until seated. Use a hose clamp if required for higher pressure. Avoid overtightening the brass threads.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
