MEM-CO Barbed Fitting Elbow: 1/4 in Pipe x 11/64 in ID Size, MNPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow (MPN 1/4LB4) is a standard brass barbed tube fitting with a 1/4 in MNPT connection and a 11/64 in ID beaded barb. This MNPT x Barbed, Brass, Beaded Barb configuration provides a…
SKU 3G-OTH-476602
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow (MPN 1/4LB4) is a standard brass barbed tube fitting with a 1/4 in MNPT connection and a 11/64 in ID beaded barb. This MNPT x Barbed, Brass, Beaded Barb configuration provides a secure, leak-resistant joint for fluid or air systems. 3G Electric sources this genuine MEM-CO component across 14 industrial departments, with specialist expertise in combustion, pumps, and controls to ensure you get the right fitting for your application.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Elbow 1/4LB4 used for?
The MEM-CO Barbed Fitting Elbow 1/4LB4 connects a 1/4 in male NPT pipe to a 11/64 in ID flexible tube in fluid or air systems. Its brass beaded barb creates a secure, leak-resistant joint, commonly used in pneumatic controls, lubrication lines, and low-pressure hydraulic circuits across industrial departments.
What are the specifications of the MEM-CO 1/4LB4 barbed fitting?
The MEM-CO 1/4LB4 is a standard brass barbed tube fitting elbow. It has a 1/4 in MNPT connection on one end and a 11/64 in ID beaded barb on the other. The configuration is MNPT x Barbed, Brass, Beaded Barb, manufactured by MEM-CO under part number 1/4LB4.
Where to buy the MEM-CO 1/4LB4 barbed fitting worldwide?
3G Electric supplies the genuine MEM-CO 1/4LB4 barbed fitting elbow to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us to order this brass fitting for your fluid or air system application.
How to install a MEM-CO barbed fitting elbow?
To install the MEM-CO 1/4LB4, apply thread sealant to the 1/4 in MNPT threads and tighten into the female port. Push the 11/64 in ID tube fully onto the beaded barb until seated. For secure retention, use a hose clamp on the barb if system pressure exceeds the barb's grip rating.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
