MEM-CO Barbed Fitting Elbow: 1/2 in Pipe x 1/16 in ID Size, MNPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/2 in pipe (MNPT) connection and a 1/16 in ID size, featuring a beaded barb design. This MNPT x Barbed, Brass, Beaded Barb fitting (MPN…
SKU 3G-OTH-476728
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/2 in pipe (MNPT) connection and a 1/16 in ID size, featuring a beaded barb design. This MNPT x Barbed, Brass, Beaded Barb fitting (MPN 1/2LB1) is supplied by 3G Electric, a global industrial solutions provider that interprets customer demand and delivers genuine equipment across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Elbow used for?
The MEM-CO Barbed Fitting Elbow connects a 1/2 in male NPT pipe to a 1/16 in ID flexible tube in low-pressure fluid or air systems. It is commonly used in instrumentation, pneumatic controls, and lubrication lines where a compact, leak-resistant brass fitting is required.
What are the specifications of the MEM-CO 1/2LB1 barbed fitting?
The MEM-CO 1/2LB1 is a brass barbed fitting elbow with a 1/2 in MNPT pipe thread and a 1/16 in ID barbed end. It features a beaded barb design for secure tube retention. The fitting is made of brass and is suitable for general industrial fluid handling applications.
Where to buy MEM-CO barbed fittings in worldwide?
3G Electric supplies MEM-CO barbed fittings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the MEM-CO 1/2LB1 or other brass tube fittings for your application.
How to install a MEM-CO brass barbed elbow fitting?
To install the MEM-CO brass barbed elbow, apply thread sealant to the 1/2 in MNPT end and tighten into the female port. Push the 1/16 in ID tube fully onto the beaded barb until seated. Use a hose clamp if required for higher pressure. Avoid over-tightening the brass threads.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
