MEM-CO Barbed Fitting Elbow: 1/2 in Pipe x 1/16 in ID Size, FBSPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/2 in pipe size and 1/16 in ID size. It features an FBSPT x Barbed connection type with a beaded barb design, identified by manufacturer…
SKU 3G-OTH-476622
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/2 in pipe size and 1/16 in ID size. It features an FBSPT x Barbed connection type with a beaded barb design, identified by manufacturer part number 1/2BSPT-LB1.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a MEM-CO Barbed Fitting Elbow used for?
The MEM-CO Barbed Fitting Elbow connects 1/16 in ID tubing to a 1/2 in FBSPT threaded pipe in pneumatic, hydraulic, or fluid transfer systems. Its beaded barb design secures flexible hose without clamps, making it suitable for low-pressure air, water, or oil lines in industrial machinery and instrumentation.
What are the specifications of the MEM-CO 1/2BSPT-LB1?
This MEM-CO elbow fitting has a 1/2 in pipe size (FBSPT thread) and a 1/16 in ID barbed end. It is made of brass with a beaded barb design. The manufacturer part number is 1/2BSPT-LB1. It is a standard brass barbed tube fitting for low-pressure fluid or air connections.
Where to buy MEM-CO barbed fittings in worldwide?
3G Electric supplies MEM-CO barbed fittings like the 1/2BSPT-LB1 elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this brass fitting. We source genuine industrial components across 14 departments.
How to install a MEM-CO barbed elbow fitting?
To install the MEM-CO barbed elbow, push the 1/16 in ID tubing firmly onto the beaded barb until seated. Apply thread sealant to the 1/2 in FBSPT male thread and tighten into the female port. Do not overtighten brass fittings. Test for leaks at operating pressure before full service.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
