MEM-CO Barbed Fitting Adapter: 1/8 in Pipe x 11/64 in ID Size, FNPT x Barbed, Brass
The MEM-CO Barbed Fitting Adapter is a standard brass barbed tube fitting with a 1/8 in FNPT connection and a 11/64 in ID beaded barb. This FNPT x Barbed, Brass, Beaded Barb adapter (MPN 1/8FB4) provides a…
SKU 3G-OTH-476447
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Adapter is a standard brass barbed tube fitting with a 1/8 in FNPT connection and a 11/64 in ID beaded barb. This FNPT x Barbed, Brass, Beaded Barb adapter (MPN 1/8FB4) provides a straightforward solution for connecting tubing to threaded pipe ports in industrial systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Adapter used for?
The MEM-CO Barbed Fitting Adapter connects flexible tubing to threaded pipe ports in industrial systems. Its 1/8 in FNPT thread and 11/64 in ID beaded barb provide a secure, leak-resistant joint for pneumatic, hydraulic, or fluid-handling applications.
What are the specifications of the MEM-CO 1/8FB4 barbed fitting?
The MEM-CO 1/8FB4 is a standard brass barbed tube fitting with a 1/8 in FNPT female thread and a 11/64 in ID beaded barb. It is made of brass and configured as FNPT x Barbed, Brass, Beaded Barb. This adapter is suitable for low-pressure tubing connections.
Where to buy MEM-CO barbed fittings in worldwide?
3G Electric supplies MEM-CO barbed fittings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the MEM-CO 1/8FB4 or other brass barbed adapters for your application.
How to install a MEM-CO barbed fitting adapter?
To install the MEM-CO 1/8FB4, wrap the FNPT threads with PTFE tape and hand-tighten into the female port. Push the tubing fully onto the beaded barb until seated. For a secure seal, use a hose clamp on the barb if system pressure exceeds 1.5 bar. Always verify compatibility with your fluid and temperature range.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
