MEM-CO Barbed Fitting Elbow: 1/8 in Pipe x 5/32 in ID Size, FNPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/8 in FNPT pipe connection and a 5/32 in ID beaded barb. This FNPT x Barbed, Brass, Beaded Barb configuration (MPN 1/8FLB3-1/2) is…
SKU 3G-OTH-476450
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/8 in FNPT pipe connection and a 5/32 in ID beaded barb. This FNPT x Barbed, Brass, Beaded Barb configuration (MPN 1/8FLB3-1/2) is designed for reliable tube connections in industrial fluid systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Elbow used for?
The MEM-CO Barbed Fitting Elbow connects 5/32 in ID tubing to a 1/8 in FNPT port in industrial fluid systems. It is commonly used in pneumatic, lubrication, and low-pressure liquid transfer applications where a reliable, leak-resistant tube connection is required.
What are the specifications of the MEM-CO 1/8FLB3-1/2 barbed fitting?
This MEM-CO fitting is a brass elbow with a 1/8 in FNPT female thread on one end and a 5/32 in ID beaded barb on the other. The beaded barb design secures flexible tubing without clamps. It is suitable for air, water, and oil service up to moderate pressures.
Where to buy MEM-CO barbed fittings in worldwide?
3G Electric supplies MEM-CO barbed fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial sourcing partner, we provide genuine MEM-CO parts like the 1/8FLB3-1/2 elbow for fluid systems across multiple industries.
How to install a MEM-CO barbed fitting elbow?
To install, wrap PTFE tape on the FNPT threads and tighten into the female port. Push the tubing fully onto the beaded barb until seated. For a secure seal, use a hose clamp if system pressure exceeds 1.5 bar. Always verify tube ID matches the 5/32 in barb size.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
