MEM-CO Barbed Fitting Elbow: 1/8 in Pipe x 1/8 in ID Size, FBSPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/8 in pipe (FBSPT) connection and a 1/8 in ID size, featuring a beaded barb design. This elbow fitting is manufactured by MEM-CO under…
SKU 3G-OTH-476776
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/8 in pipe (FBSPT) connection and a 1/8 in ID size, featuring a beaded barb design. This elbow fitting is manufactured by MEM-CO under part number 1/8BSPT-FLB3.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a MEM-CO Barbed Fitting Elbow used for?
The MEM-CO Barbed Fitting Elbow connects 1/8 in ID tubing to a 1/8 in FBSPT threaded port in pneumatic, fluid transfer, or low-pressure lubrication systems. Its beaded barb design secures flexible hose without clamps, making it suitable for industrial air lines, coolant circuits, and instrumentation panels.
What are the specifications of the MEM-CO 1/8BSPT-FLB3 elbow?
This MEM-CO elbow has a 1/8 in pipe thread (FBSPT) on one end and a 1/8 in ID barbed connection on the other. It is made of brass with a beaded barb design. The manufacturer part number is 1/8BSPT-FLB3. It is a standard barbed tube fitting for low-pressure applications.
Where to buy MEM-CO barbed fittings in worldwide?
3G Electric supplies MEM-CO barbed fittings worldwide. As a global industrial sourcing partner, we handle logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on the MEM-CO 1/8BSPT-FLB3 elbow. We provide genuine MEM-CO components for pneumatic and fluid systems.
How to install a MEM-CO barbed fitting elbow?
To install the MEM-CO barbed elbow, apply thread sealant to the FBSPT male thread and tighten into the port. Push the 1/8 in ID hose fully onto the beaded barb until seated. For a secure seal, use a hose clamp if pressure exceeds 1.5 bar. Avoid overtightening the brass threads to prevent cracking.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
