MEM-CO Barbed Fitting Elbow: 1/8 in Pipe x 5/32 in ID Size, FBSPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/8 in pipe size and 5/32 in ID size, featuring an FBSPT x Barbed, Brass, Beaded Barb design (MPN 1/8BSPT-FLB3-1/2). This elbow fitting…
SKU 3G-OTH-476777
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/8 in pipe size and 5/32 in ID size, featuring an FBSPT x Barbed, Brass, Beaded Barb design (MPN 1/8BSPT-FLB3-1/2). This elbow fitting is part of our broad industrial supply across 14 departments, with specialist depth in fluid-handling components.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Elbow used for?
The MEM-CO Barbed Fitting Elbow connects 5/32 in ID tubing to a 1/8 in FBSPT threaded port in pneumatic or low-pressure fluid systems. It is commonly used in instrumentation, lubrication, and control lines where a compact, leak-resistant brass elbow is required.
What are the specifications of the MEM-CO 1/8BSPT-FLB3-1/2?
This MEM-CO elbow has a 1/8 in pipe size (FBSPT thread) and a 5/32 in ID barbed end. It is made of brass with a beaded barb design. The manufacturer part number is 1/8BSPT-FLB3-1/2. It is a standard barbed tube fitting for fluid handling.
Where to buy MEM-CO barbed fittings in worldwide?
3G Electric supplies MEM-CO barbed fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine components like this brass elbow across 14 departments, including specialist fluid-handling expertise.
How to install a MEM-CO barbed fitting elbow?
To install, push the 5/32 in ID tubing firmly onto the beaded barb until seated. Apply thread sealant to the 1/8 in FBSPT male thread and tighten into the port. Avoid over-torquing brass fittings. Always verify pressure and temperature ratings with the manufacturer before use.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
