MEM-CO Barbed Fitting Elbow: 1/4 in Pipe x 11/64 in ID Size, FBSPP x Barbed, Brass
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/4 in pipe connection and 11/64 in ID size. It features an FBSPP x Barbed, Brass, Beaded Barb design (MPN 1/4BSPP-FLB4). 3G Electric…
SKU 3G-OTH-476585
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/4 in pipe connection and 11/64 in ID size. It features an FBSPP x Barbed, Brass, Beaded Barb design (MPN 1/4BSPP-FLB4). 3G Electric sources this genuine MEM-CO component across 14 industrial departments, with specialist expertise in combustion, pumps and controls to ensure you get the right fitting for your application.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Elbow used for?
The MEM-CO Barbed Fitting Elbow connects 1/4 in FBSPP threaded pipe to 11/64 in ID flexible tubing in pneumatic, hydraulic, or fluid transfer systems. It is commonly used in industrial machinery, combustion burner fuel lines, and pump control circuits where a leak-resistant, brass beaded-barb joint is required.
What are the specifications of the MEM-CO 1/4BSPP-FLB4?
The MEM-CO 1/4BSPP-FLB4 is a standard brass barbed fitting elbow with a 1/4 in FBSPP female thread on one end and a beaded barb for 11/64 in ID tubing on the other. The body is solid brass, and the design is FBSPP x Barbed, Brass, Beaded Barb. It is manufactured by MEM-CO.
Where to buy MEM-CO barbed fittings in worldwide?
3G Electric supplies genuine MEM-CO barbed fittings like the 1/4BSPP-FLB4 elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source across 14 departments and ensure you receive the correct MEM-CO component for your application.
How to install a MEM-CO brass barbed elbow?
To install the MEM-CO brass barbed elbow, apply thread sealant to the 1/4 in FBSPP male pipe and tighten securely. Push the 11/64 in ID tubing fully onto the beaded barb until seated. For a leak-free seal, use a hose clamp on the barb if system pressure exceeds 1.5 bar. Always follow the manufacturer's torque and pressure guidelines.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
