MEM-CO Barbed Fitting Elbow: 1/4 in Pipe x 1/4 in ID Size, FBSPP x Barbed, Brass
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/4 in pipe x 1/4 in ID size, type FBSPP x Barbed, Brass, Beaded Barb (MPN 1/4BSPP-FLB6). This elbow configuration connects tubing to…
SKU 3G-OTH-476686
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/4 in pipe x 1/4 in ID size, type FBSPP x Barbed, Brass, Beaded Barb (MPN 1/4BSPP-FLB6). This elbow configuration connects tubing to threaded ports in pneumatic or fluid systems. 3G Electric interprets demand and delivers this fitting across 14 industrial departments, with specialist depth in pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Elbow used for?
The MEM-CO Barbed Fitting Elbow connects 1/4 in ID tubing to 1/4 in BSPP threaded ports in pneumatic or fluid systems. It is commonly used in compressed air lines, lubrication systems, and low-pressure fluid transfer applications across industrial machinery.
What are the specifications of the MEM-CO 1/4BSPP-FLB6?
The MEM-CO 1/4BSPP-FLB6 is a brass barbed fitting elbow with a 1/4 in BSPP male thread x 1/4 in ID barbed connection. It features a beaded barb design for secure tube retention and is made from corrosion-resistant brass for durability in pneumatic and fluid systems.
Where to buy MEM-CO barbed fittings worldwide?
3G Electric supplies the MEM-CO Barbed Fitting Elbow worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us to order the 1/4BSPP-FLB6 or other MEM-CO fittings for your pneumatic or fluid system needs.
How to install a MEM-CO barbed elbow fitting?
To install the MEM-CO barbed elbow, cut tubing squarely, push it fully onto the barbed end until seated against the beaded shoulder, then tighten the BSPP thread into the port using a wrench on the hex. Avoid over-tightening to prevent thread damage. Always verify system pressure compatibility before use.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
