MEM-CO Barbed Fitting Elbow: 3/8 in Pipe x 5/32 in ID Size, FNPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 3/8 in FNPT connection and a 5/32 in ID beaded barb, model 3/8FLB3-1/2. 3G Electric interprets this demand and sources it across 14…
SKU 3G-OTH-476423
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 3/8 in FNPT connection and a 5/32 in ID beaded barb, model 3/8FLB3-1/2. 3G Electric interprets this demand and sources it across 14 industrial departments, with specialist depth in combustion, pumps and controls as an authorised distributor for brands like Schneider, ABB, Siemens, SKF, Festo, Fluke, Interpump and FBR.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Elbow used for?
The MEM-CO Barbed Fitting Elbow connects a 3/8 in FNPT pipe to a 5/32 in ID flexible tube in pneumatic, hydraulic, or fluid transfer systems. It is commonly used in industrial machinery, instrumentation, and control panels where a leak-resistant, brass beaded-barb joint is required.
What are the specifications of the MEM-CO 3/8FLB3-1/2?
This MEM-CO fitting is a brass elbow with a 3/8 in female NPT thread on one end and a 5/32 in ID beaded barb on the other. The barb design secures tubing without clamps. It is model 3/8FLB3-1/2, suitable for low-pressure fluid and air applications.
Where to buy the MEM-CO Barbed Fitting Elbow worldwide?
3G Electric supplies the MEM-CO Barbed Fitting Elbow worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source this fitting across 14 departments, including pneumatics and instrumentation, and deliver to any international destination.
How to install a MEM-CO brass barbed elbow?
Apply thread sealant to the 3/8 in FNPT end and tighten into the female port. Push the 5/32 in ID tube fully onto the beaded barb until seated. For secure retention, use a hose clamp over the barb if pressure exceeds 1.5 bar. Always verify tube compatibility with the fluid.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
