MEM-CO Barbed Fitting Elbow: 3/8 in Pipe x 1/8 in ID Size, FBSPP x Barbed, Brass
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 3/8 in pipe x 1/8 in ID size, featuring an FBSPP x Barbed, Brass, Beaded Barb design (MPN 3/8BSPP-FLB3). This elbow fitting is supplied…
SKU 3G-OTH-476552
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 3/8 in pipe x 1/8 in ID size, featuring an FBSPP x Barbed, Brass, Beaded Barb design (MPN 3/8BSPP-FLB3). This elbow fitting is supplied by 3G Electric, a global industrial solutions provider that interprets customer demand and delivers genuine equipment across 14 departments, with specialist depth in combustion, pumps and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Elbow used for?
The MEM-CO Barbed Fitting Elbow connects 1/8 in ID flexible tubing to 3/8 in BSPP threaded ports in pneumatic, hydraulic, or fluid transfer systems. Its beaded barb design secures hose without clamps, making it suitable for low-pressure air, water, or oil lines in industrial machinery.
What are the specifications of the MEM-CO 3/8BSPP-FLB3?
This MEM-CO elbow fitting has a 3/8 in BSPP male pipe thread x 1/8 in ID barbed connection, made of brass with a beaded barb. The type is FBSPP x Barbed, Brass, Beaded Barb, and the manufacturer part number is 3/8BSPP-FLB3. It is a standard brass barbed tube fitting.
Where to buy the MEM-CO Barbed Fitting Elbow worldwide?
3G Electric supplies the MEM-CO Barbed Fitting Elbow to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the 3/8BSPP-FLB3 or similar brass fittings for your application.
How to install a MEM-CO barbed elbow fitting?
To install the MEM-CO barbed elbow, cut tubing square, push it fully onto the beaded barb until seated, and tighten the BSPP thread into the female port using a wrench on the hex. No sealant is needed on the barb side. For threaded joints, use PTFE tape or pipe dope per standard practice.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
