MEM-CO Barbed Fitting Elbow: 1/2 in Pipe x 11/64 in ID Size, FNPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow (MPN 1/2FLB4) is a standard brass barbed tube fitting with a 1/2 in FNPT pipe connection and a 11/64 in ID beaded barb. This FNPT x Barbed, Brass, Beaded Barb elbow is designed for…
SKU 3G-OTH-476394
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow (MPN 1/2FLB4) is a standard brass barbed tube fitting with a 1/2 in FNPT pipe connection and a 11/64 in ID beaded barb. This FNPT x Barbed, Brass, Beaded Barb elbow is designed for reliable tube-to-pipe connections in industrial fluid systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Elbow 1/2FLB4 used for?
The MEM-CO Barbed Fitting Elbow connects 11/64 in ID tubing to a 1/2 in FNPT pipe port in industrial fluid systems. It is commonly used in pneumatic, lubrication, and low-pressure liquid transfer applications where a reliable, leak-resistant tube-to-pipe joint is required.
What are the specifications of the MEM-CO 1/2FLB4 barbed fitting?
The MEM-CO 1/2FLB4 is a brass barbed fitting elbow with a 1/2 in FNPT female pipe thread and an 11/64 in ID beaded barb. It is designed for standard tube-to-pipe connections in industrial fluid handling. The manufacturer part number is 1/2FLB4.
Where to buy the MEM-CO 1/2FLB4 barbed fitting worldwide?
3G Electric supplies the MEM-CO 1/2FLB4 barbed fitting elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this brass barbed fitting for your industrial fluid system.
How to install a MEM-CO barbed fitting elbow?
To install the MEM-CO 1/2FLB4, first cut the tubing square and deburr the end. Push the tube firmly onto the beaded barb until fully seated. Apply thread sealant to the 1/2 in FNPT threads and tighten the elbow into the mating pipe port. Do not overtighten.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
