MEM-CO Barbed Fitting Elbow: 1/2 in Pipe x 1/4 in ID Size, FNPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow (MPN 1/2FLB6) is a standard brass barbed tube fitting with a 1/2 in FNPT connection and a 1/4 in ID beaded barb. This elbow configuration is designed for secure tube attachment in…
SKU 3G-OTH-476637
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow (MPN 1/2FLB6) is a standard brass barbed tube fitting with a 1/2 in FNPT connection and a 1/4 in ID beaded barb. This elbow configuration is designed for secure tube attachment in fluid systems, supplied by 3G Electric across 14 industrial departments with specialist depth in pumps and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Elbow 1/2FLB6 used for?
The MEM-CO Barbed Fitting Elbow (1/2FLB6) connects a 1/2 in FNPT pipe to a 1/4 in ID flexible tube in fluid systems. It is commonly used in pneumatic, hydraulic, and water-transfer applications where a secure, leak-resistant joint is needed. 3G Electric supplies this fitting across 14 industrial departments.
What are the specifications of the MEM-CO 1/2FLB6 barbed fitting?
The MEM-CO 1/2FLB6 is a brass elbow fitting with a 1/2 in FNPT female thread on one end and a 1/4 in ID beaded barb on the other. The beaded barb design provides a secure grip on tubing. It is manufactured by MEM-CO under part number 1/2FLB6.
Where to buy the MEM-CO 1/2FLB6 barbed fitting worldwide?
3G Electric supplies the MEM-CO 1/2FLB6 barbed fitting elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time. We source genuine industrial components across 14 departments, including pumps and controls.
How to install a MEM-CO barbed fitting elbow?
To install the MEM-CO 1/2FLB6, apply thread sealant to the 1/2 in FNPT connection and tighten into the mating port. Push the 1/4 in ID tube fully onto the beaded barb until seated. For secure retention, use a hose clamp on the barb if system pressure exceeds 1.5 bar. Always follow system manufacturer guidelines.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
