MEM-CO Barbed Fitting Elbow: 1/2 in Pipe x 11/64 in ID Size, FBSPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/2 in pipe size and 11/64 in ID size. It features an FBSPT x Barbed, Brass, Beaded Barb design (MPN 1/2BSPT-FLB1). 3G Electric sources…
SKU 3G-OTH-476638
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/2 in pipe size and 11/64 in ID size. It features an FBSPT x Barbed, Brass, Beaded Barb design (MPN 1/2BSPT-FLB1). 3G Electric sources this fitting across 14 industrial departments, with specialist expertise in combustion, pumps, and controls ensuring accurate sourcing and support.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Elbow used for?
The MEM-CO Barbed Fitting Elbow connects tubing to threaded pipe ports in pneumatic, hydraulic, and fluid transfer systems. Its 1/2 in FBSPT thread and 11/64 in ID barbed end suit low-pressure air, water, or oil lines in industrial machinery, combustion systems, and pump installations.
What are the specifications of the MEM-CO 1/2BSPT-FLB1?
This MEM-CO fitting is a brass barbed elbow with a 1/2 in FBSPT male thread and an 11/64 in ID beaded barb. The MPN is 1/2BSPT-FLB1. It is designed for standard tube connections in industrial applications requiring corrosion resistance and reliable sealing.
Where to buy MEM-CO barbed fittings in worldwide?
3G Electric supplies the MEM-CO Barbed Fitting Elbow worldwide, handling full logistics and customs clearance. As a global industrial solutions provider across 14 departments, we source this fitting and deliver it to your facility. Contact us for availability and lead time.
How to install a MEM-CO barbed fitting elbow?
To install, wrap thread sealant on the 1/2 in FBSPT male thread and tighten into the female port. Push the tubing fully onto the 11/64 in beaded barb until seated. For brass fittings, avoid over-tightening to prevent cracking. Always verify pressure and temperature ratings before use.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
