MEM-CO Barbed Fitting Elbow: 1/2 in Pipe x 11/64 in ID Size, FBSPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/2 in pipe connection and 11/64 in ID size. It features an FBSPT x Barbed, Brass, Beaded Barb design (MPN 1/2BSPT-FLB4). 3G Electric…
SKU 3G-OTH-476698
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/2 in pipe connection and 11/64 in ID size. It features an FBSPT x Barbed, Brass, Beaded Barb design (MPN 1/2BSPT-FLB4). 3G Electric interprets this demand and sources the genuine fitting, backed by specialist expertise in pumps and controls across 14 industrial departments.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Elbow used for?
The MEM-CO Barbed Fitting Elbow connects 1/2 in FBSPT threaded pipe to 11/64 in ID flexible tubing in fluid or pneumatic systems. It is commonly used in pump, control, and instrumentation applications across industrial departments such as hydraulics, pneumatics, and material handling.
What are the specifications of the MEM-CO 1/2BSPT-FLB4?
This MEM-CO fitting is a brass barbed elbow with a 1/2 in FBSPT male thread on one end and a beaded barb for 11/64 in ID tubing on the other. The manufacturer part number is 1/2BSPT-FLB4. It is a standard brass barbed tube fitting for low-pressure fluid or air lines.
Where to buy MEM-CO barbed fittings in worldwide?
3G Electric supplies and delivers genuine MEM-CO barbed fittings worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure the fitting reaches your facility. Contact us to source the MEM-CO 1/2BSPT-FLB4 or other brass barbed fittings.
How to install a MEM-CO barbed fitting elbow?
To install the MEM-CO barbed elbow, apply thread sealant to the 1/2 in FBSPT male thread and tighten into the female port. Push the 11/64 in ID tubing fully onto the beaded barb until seated. For secure retention, use a hose clamp on the barb if system pressure exceeds 1.5 bar.
MEM-CO Produk
3G Electric memasok MEM-CO standard brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
