MEM-CO Barbed Fitting Elbow: 1/8 in Pipe x 1/16 in ID Size, MNPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow is a nickel-plated brass barbed tube fitting with a 1/8 in MNPT pipe connection and a 1/16 in ID beaded barb. This MNPT x Barbed, Brass, Beaded Barb configuration (MPN 1/8LB1-NP)…
SKU 3G-OTH-465318
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow is a nickel-plated brass barbed tube fitting with a 1/8 in MNPT pipe connection and a 1/16 in ID beaded barb. This MNPT x Barbed, Brass, Beaded Barb configuration (MPN 1/8LB1-NP) provides a compact 90-degree elbow for fluid or pneumatic lines.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a MEM-CO Barbed Fitting Elbow used for?
The MEM-CO Barbed Fitting Elbow connects a 1/8 in male NPT threaded port to a 1/16 in ID flexible tube, forming a compact 90-degree turn. It is used in low-pressure fluid or pneumatic lines for instrumentation, control panels, and lubrication systems where a leak-resistant, corrosion-protected joint is needed.
What are the specifications of the MEM-CO 1/8LB1-NP?
The MEM-CO 1/8LB1-NP is a nickel-plated brass barbed elbow fitting. It has a 1/8 in MNPT pipe thread on one end and a 1/16 in ID beaded barb on the other. The 90-degree configuration (MNPT x Barbed) allows tight routing in confined spaces. The nickel plating resists corrosion.
Where to buy MEM-CO barbed fittings worldwide?
3G Electric supplies MEM-CO barbed fittings worldwide. As a global industrial sourcing partner, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on the MEM-CO 1/8LB1-NP or other nickel-plated brass barbed tube fittings.
How to install a MEM-CO barbed elbow fitting?
To install the MEM-CO barbed elbow, apply thread sealant to the 1/8 in MNPT end and tighten into the female port. Push the 1/16 in ID tube fully onto the beaded barb until seated. For secure retention, use a hose clamp on the barb if pressure exceeds 1.5 bar. Avoid overtightening the brass threads.
MEM-CO Produk
3G Electric memasok MEM-CO nickel-plated brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
