MEM-CO Barbed Fitting Elbow: 3/8 in Pipe x 1/16 in ID Size, FBSPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow is a nickel-plated brass barbed tube fitting with a 3/8 in pipe (FBSPT) connection and a 1/16 in ID barbed end, featuring a beaded barb design. This elbow fitting is part of the MEM-CO…
SKU 3G-OTH-465431
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MEM-CO Barbed Fitting Elbow is a nickel-plated brass barbed tube fitting with a 3/8 in pipe (FBSPT) connection and a 1/16 in ID barbed end, featuring a beaded barb design. This elbow fitting is part of the MEM-CO line of brass barbed tube fittings, available as SKU 792D52 with manufacturer part number 3/8BSPT-LB1-NP.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MEM-CO Barbed Fitting Elbow used for?
The MEM-CO Barbed Fitting Elbow connects a 3/8 in FBSPT threaded pipe to a 1/16 in ID flexible tube in low-pressure pneumatic, instrumentation, or fluid-transfer systems. Its beaded barb design secures tubing without clamps, making it suitable for panel-mount or tight-space routing in industrial equipment.
What are the specifications of the MEM-CO 3/8BSPT-LB1-NP elbow?
This MEM-CO elbow has a 3/8 in FBSPT male thread on one end and a 1/16 in ID barbed connection on the other. It is made of nickel-plated brass with a beaded barb. The manufacturer part number is 3/8BSPT-LB1-NP, and it is available as SKU 792D52.
Where to buy MEM-CO barbed fittings in worldwide?
3G Electric supplies MEM-CO barbed fittings like the 3/8BSPT-LB1-NP elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this nickel-plated brass fitting.
How to install a MEM-CO beaded barb elbow?
Push the 1/16 in ID tubing firmly onto the beaded barb until it seats past the bead. For the threaded end, apply PTFE tape to the 3/8 in FBSPT male thread and tighten into the female port. Do not overtighten; use a backup wrench on the fitting body to avoid distortion.
MEM-CO Produk
3G Electric memasok MEM-CO nickel-plated brass barbed tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
