METZ CONNECT Sensor Cable: M12 Female Straight X M12 Female Straight, 4 Pins, Black
The METZ CONNECT Sensor Cable (SKU 802LG0, MPN 142MCA11010) is a double-ended cordset with a PUR jacket designed for twisting applications. It features M12 female straight connectors on both ends, 4 pins, a black PUR…
SKU 3G-OTH-50257
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The METZ CONNECT Sensor Cable (SKU 802LG0, MPN 142MCA11010) is a double-ended cordset with a PUR jacket designed for twisting applications. It features M12 female straight connectors on both ends, 4 pins, a black PUR jacket, and a 1 m cable length. The cable is rated IPX5 and uses 22 AWG/42 AWG wire.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the METZ CONNECT sensor cable used for?
This double-ended cordset with PUR jacket is used for twisting applications in industrial automation, connecting sensors or actuators to control systems. Its M12 female straight connectors on both ends and IPX5 rating make it suitable for harsh environments requiring reliable signal transmission.
What are the specifications of the METZ CONNECT 142MCA11010 sensor cable?
The METZ CONNECT sensor cable (MPN 142MCA11010) has M12 female straight connectors on both ends, 4 pins, a black PUR jacket, 1 m cable length, IPX5 rating, and 22 AWG/42 AWG wire size. It is designed for twisting applications in industrial settings.
Where to buy METZ CONNECT sensor cables worldwide?
You can source the METZ CONNECT sensor cable (SKU 802LG0) from 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide locations, ensuring you receive the correct cable for your application.
How to install a METZ CONNECT M12 sensor cable?
To install, align the M12 female connector with the mating male port and tighten the coupling nut by hand until snug. Avoid over-tightening. Ensure the cable is routed without sharp bends to protect the PUR jacket. Verify the IPX5 seal is intact before use.
Digunakan dalam
Aplikasi umum untuk METZ CONNECTMETZ CONNECT Produk
3G Electric memasok METZ CONNECT double-ended cordsets with pur jacket for twisting applications. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















