Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
MILLER FLUID POWER Front or Rear Flange Cylinder Mount, Steel, 3/4"-16 Thread - Front or Rear Flange Cylinder Mounts
MILLER FLUID POWERFront or Rear Flange Cylinder Mounts

MILLER FLUID POWER Front or Rear Flange Cylinder Mount, Steel, 3/4"-16 Thread

Mount silinder MILLER FLUID POWER tipe Front or Rear Flange Cylinder Mount dengan diameter bore 2 inci ini terbuat dari baja dan dirancang untuk aplikasi industri yang memerlukan pemasangan silinder pneumatik atau…

SKU 3G-OTH-156510

Juga terdaftar sebagai: HV3MKJH200100 · HV3 MKJ H 200 100 · HV3-MKJ-H-200-100

Merek
MILLER FLUID POWER
Item
Front or Rear Flange Cylinder Mount, Steel, 3/4"-16 Thread
Kategori
Front or Rear Flange Cylinder Mounts
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

MILLER FLUID POWER
Manufacturer Part Number
HV3-MKJ/H-200-100
Type
Steel
Thread Size
3/4"-16

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

MILLER FLUID POWER Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Mount silinder MILLER FLUID POWER tipe Front or Rear Flange Cylinder Mount dengan diameter bore 2 inci ini terbuat dari baja dan dirancang untuk aplikasi industri yang memerlukan pemasangan silinder pneumatik atau hidrolik yang kokoh. Mount ini mendukung standar NFPA MF1 (Front) dan NFPA MF2 (Rear), dilengkapi dengan (4) baut pemasangan dan ukuran ulir 3/4"-16. Produk dengan nomor bagian HV3-MKJ/H-200-100 ini merupakan komponen peralatan industri yang andal untuk sistem Anda.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa fungsi dari MILLER FLUID POWER Front or Rear Flange Cylinder Mount?

Mount ini berfungsi sebagai dudukan flensa depan atau belakang untuk silinder dengan diameter bore 2 inci. Terbuat dari baja, mount ini memastikan pemasangan yang stabil dan aman pada sistem pneumatik atau hidrolik, sesuai standar NFPA MF1 (Front) dan NFPA MF2 (Rear).

Apa spesifikasi teknis dari MILLER FLUID POWER HV3-MKJ/H-200-100?

Spesifikasi produk ini meliputi: tipe baja, diameter bore 2 inci, ukuran ulir 3/4"-16, dilengkapi (4) baut pemasangan, dan mendukung standar NFPA MF1 (Front) serta NFPA MF2 (Rear). Nomor bagian pabrikan adalah HV3-MKJ/H-200-100 dari MILLER FLUID POWER.

Di mana beli MILLER FLUID POWER Front or Rear Flange Cylinder Mount di Indonesia?

Anda dapat membeli produk MILLER FLUID POWER ini melalui 3G Electric, distributor resmi yang memasok dan mengirimkan peralatan industri ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Bagaimana cara memilih mount silinder yang tepat untuk sistem saya?

Pilih mount yang sesuai dengan diameter bore silinder Anda, dalam hal ini 2 inci. Pastikan mount mendukung standar pemasangan yang diperlukan, seperti NFPA MF1 atau MF2. MILLER FLUID POWER mount ini terbuat dari baja dan memiliki ukuran ulir 3/4"-16, cocok untuk aplikasi industri yang memerlukan kekuatan tinggi.

Digunakan dalam

Aplikasi umum untuk MILLER FLUID POWER
Manufacturing automation — Miller Fluid Power NFPA tie-rod cylinders (e.g., 1HHV3B40012000) for clamping and positioning in assembly lines.
Material handling — Miller Fluid Power compact hydraulic cylinders (e.g., 1H000065977) for compact lifting and tilting mechanisms.
Packaging machinery — Miller Fluid Power rod clevis mounts (e.g., HV3-MKRC-200/250) for connecting cylinders to packaging press linkages.
Industrial presses — Miller Fluid Power clevis bracket mounts (e.g., HV3-MKBC-200-100) for mounting cylinders in press frames.
Automated guided vehicles — Miller Fluid Power eye bracket mounts (e.g., HV3-MKEB-150) for securing cylinders in steering or lifting systems.
Process equipment — Miller Fluid Power NFPA tie-rod cylinders (e.g., 1HHV3B2500600M) for valve actuation in chemical processing.

MILLER FLUID POWER Produk

3G Electric memasok MILLER FLUID POWER front or rear flange cylinder mounts. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Plastic motor mount adapter for connecting a 56C frame motor to Fluid-O-Tech PA/PB 070 series pumps. Includes a coupler for shaft alignment and torque transmission. Used in industrial fluid handling systems
FLUID-O-TECH
Plastic motor mount adapter for connecting a 56C frame motor to Fluid-O-Tech PA/PB 070 series pumps. Includes a coupler for shaft alignment and torque transmission. Used in industrial fluid handling systems
FLUID-O-TECH
FLUID-O-TECH
Motor mount adapter for connecting a 56C frame motor to a Fluid-O-Tech THSS series pump. Includes a magnet. Both pump side and motor side have 56C motor frame size. Used in industrial fluid handling systems for pump-motor alignment and coupling
FLUID-O-TECH
FLUID-O-TECH
Motor mounting assembly for coupling a 56C frame motor to a Fluid-O-Tech THSS series pump. Includes clamp for secure attachment. Compatible with 56C frame sizes on both pump and motor sides
This cast iron close-coupled flange has a finished bore with a round keyway for inch-dimension shafts. It is rated for a maximum speed of 3,600 RPM and has an outside diameter of 8 5/8 inches. Commonly used in power transmission systems to connect motors to pumps, conveyors, and compressors
MASTERDRIVE
This cast iron close-coupled flange has a finished bore with a round keyway for inch-dimension shafts. It is rated for a maximum speed of 3,600 RPM and has an outside diameter of 8 5/8 inches. Commonly used in power transmission systems to connect motors to pumps, conveyors, and compressors
Cast iron close-coupled flange with a 65 mm metric round keyed finished bore. Outside diameter 7 1/2 in, maximum speed 3,600 RPM. Used in power transmission systems to connect motor shafts to driven components such as pumps, compressors, and conveyors
MASTERDRIVE
Cast iron close-coupled flange with a 65 mm metric round keyed finished bore. Outside diameter 7 1/2 in, maximum speed 3,600 RPM. Used in power transmission systems to connect motor shafts to driven components such as pumps, compressors, and conveyors
This cast iron close-coupled flange is designed for connecting rotating shafts in power transmission systems. It features a finished round keyed bore and is rated for a maximum speed of 3,600 RPM with an outside diameter of 8 5/8 inches. Suitable for use with pumps, motors, and other industrial equipment requiring a rigid flange coupling
MASTERDRIVE
This cast iron close-coupled flange is designed for connecting rotating shafts in power transmission systems. It features a finished round keyed bore and is rated for a maximum speed of 3,600 RPM with an outside diameter of 8 5/8 inches. Suitable for use with pumps, motors, and other industrial equipment requiring a rigid flange coupling

Lainnya dari MILLER FLUID POWER

Lihat semua MILLER FLUID POWER suku cadang →
Steel flange mount for hydraulic or pneumatic cylinders, accommodating NFPA MF1 (front) or MF2 (rear) configurations. Includes four mounting bolts with 1-1/4"-12 thread size. Used to secure cylinders in applications requiring precise alignment and load distribution
MILLER FLUID POWER
Steel flange mount for hydraulic or pneumatic cylinders, accommodating NFPA MF1 (front) or MF2 (rear) configurations. Includes four mounting bolts with 1-1/4"-12 thread size. Used to secure cylinders in applications requiring precise alignment and load distribution
Steel flange mount for hydraulic or pneumatic cylinders with 3 1/4 in bore diameter and 1"-14 thread size. Complies with NFPA MF1 (front) and NFPA MF2 (rear) standards. Includes four mounting bolts. Used to secure cylinders in industrial machinery and automation systems
MILLER FLUID POWER
Steel flange mount for hydraulic or pneumatic cylinders with 3 1/4 in bore diameter and 1"-14 thread size. Complies with NFPA MF1 (front) and NFPA MF2 (rear) standards. Includes four mounting bolts. Used to secure cylinders in industrial machinery and automation systems
Steel mount for 1-1/2 in bore diameter cylinders, designed for NFPA MF1 (front) or MF2 (rear) flange configurations. Includes four mounting bolts with 7/16-20 thread size. Used to secure pneumatic or hydraulic cylinders in industrial automation, packaging, and material handling systems
MILLER FLUID POWER
Steel mount for 1-1/2 in bore diameter cylinders, designed for NFPA MF1 (front) or MF2 (rear) flange configurations. Includes four mounting bolts with 7/16-20 thread size. Used to secure pneumatic or hydraulic cylinders in industrial automation, packaging, and material handling systems
Steel mount for hydraulic or pneumatic cylinders with 2 1/2 in bore diameter. Supports NFPA MF1 (front) and NFPA MF2 (rear) configurations. Includes four mounting bolts with 3/4"-16 thread size. Used to secure cylinders in industrial equipment requiring rigid alignment and load distribution
MILLER FLUID POWER
Steel mount for hydraulic or pneumatic cylinders with 2 1/2 in bore diameter. Supports NFPA MF1 (front) and NFPA MF2 (rear) configurations. Includes four mounting bolts with 3/4"-16 thread size. Used to secure cylinders in industrial equipment requiring rigid alignment and load distribution
This steel flange mount is designed for front or rear mounting of cylinders with 1 1/2 in bore diameter. It complies with NFPA MF1 specifications and includes four bolts for installation. Typical applications include securing pneumatic or hydraulic cylinders in industrial machinery and automation systems
MILLER FLUID POWER
This steel flange mount is designed for front or rear mounting of cylinders with 1 1/2 in bore diameter. It complies with NFPA MF1 specifications and includes four bolts for installation. Typical applications include securing pneumatic or hydraulic cylinders in industrial machinery and automation systems