MILWAUKEE VALVE Manual Two-Way Ball Valve: 1 in, Brass, Straight, Sweat x Sweat
The MILWAUKEE VALVE Manual Two-Way Ball Valve is a 1-inch brass ball valve with a full port ball port and a straight, sweat x sweat connection. It features a locking lever handle and is identified by manufacturer…
SKU 3G-OTH-432044
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MILWAUKEE VALVE Manual Two-Way Ball Valve is a 1-inch brass ball valve with a full port ball port and a straight, sweat x sweat connection. It features a locking lever handle and is identified by manufacturer part number 1" BA-485BLL.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MILWAUKEE VALVE 1" BA-485BLL ball valve used for?
This manual two-way ball valve is used for on/off flow control in plumbing, HVAC, and industrial piping systems. Its full-port design minimizes pressure drop, and the sweat x sweat connections allow copper-tube installation. The locking lever handle provides tamper-resistant shutoff.
What are the specifications of the MILWAUKEE VALVE 1" BA-485BLL?
This valve is a 1-inch, brass, straight, sweat x sweat, full-port ball valve with a locking lever handle. The manufacturer part number is 1" BA-485BLL. It is designed for manual two-way operation and is suitable for use with water, oil, and gas applications within rated pressure and temperature limits.
Where to buy the MILWAUKEE VALVE 1" BA-485BLL worldwide?
3G Electric supplies the MILWAUKEE VALVE 1" BA-485BLL worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this valve to any international destination.
How to install a sweat x sweat ball valve like the MILWAUKEE BA-485BLL?
To install, clean and flux the copper pipe ends and valve sockets. Heat the joint evenly with a torch until solder melts into the gap, then allow it to cool without moving. Avoid overheating the valve body to prevent damage. Always verify the locking lever operates freely before pressurizing the system.
Digunakan dalam
Aplikasi umum untuk MILWAUKEE VALVEMILWAUKEE VALVE Produk
3G Electric memasok MILWAUKEE VALVE brass ball valves. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
