MILWAUKEE VALVE Manual Two-Way Ball Valve: 1 in, Brass, Straight, Sweat x Sweat
The MILWAUKEE VALVE Manual Two-Way Ball Valve is a 1-inch brass ball valve with a full port ball port and a straight body configuration. It features sweat x sweat connections and a Memory Stop Lever handle. This…
SKU 3G-OTH-432232
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MILWAUKEE VALVE Manual Two-Way Ball Valve is a 1-inch brass ball valve with a full port ball port and a straight body configuration. It features sweat x sweat connections and a Memory Stop Lever handle. This product is identified by manufacturer part number 1" BA-485BMS.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MILWAUKEE VALVE 1" BA-485BMS ball valve used for?
This manual two-way ball valve is used for on/off flow control in residential and commercial plumbing, HVAC, and industrial piping systems. Its full-port design minimizes pressure drop, and the sweat connections allow permanent copper-tube installation. The memory-stop lever helps operators quickly return to a preset position.
What are the specifications of the MILWAUKEE VALVE 1" BA-485BMS?
This is a 1-inch brass ball valve with a straight body, full-port ball port, and sweat x sweat connections. It features a Memory Stop Lever handle. The manufacturer part number is 1" BA-485BMS. It is designed for manual two-way shut-off service in compatible systems.
Where to buy the MILWAUKEE VALVE 1" BA-485BMS worldwide?
3G Electric supplies the MILWAUKEE VALVE 1" BA-485BMS ball valve worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time. We source and deliver this valve to any country.
How to install a MILWAUKEE VALVE sweat ball valve?
Installation requires soldering the sweat ends to copper pipe. Clean and flux the pipe and valve ends, then heat evenly and apply solder. Avoid overheating the valve body to prevent damage. After cooling, operate the Memory Stop Lever to verify smooth rotation. Always follow local plumbing codes.
Digunakan dalam
Aplikasi umum untuk MILWAUKEE VALVEMILWAUKEE VALVE Produk
3G Electric memasok MILWAUKEE VALVE brass ball valves. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
