MOLINE BEARING Flange Bearing: Tapered Roller, 3 1/2 in Bore, Cast Iron, Set Screws
The MOLINE BEARING Flange Bearing is a flange-mount tapered roller bearing with a 3 1/2 in cylindrical bore, a cast iron housing, and set screws. It is lubricated with lithium complex grease and uses a 3/4 in…
SKU 3G-OTH-101377
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MOLINE BEARING Flange Bearing is a flange-mount tapered roller bearing with a 3 1/2 in cylindrical bore, a cast iron housing, and set screws. It is lubricated with lithium complex grease and uses a 3/4 in mounting bolt. This inch-system bearing is identified by manufacturer part number 19311308.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a MOLINE BEARING flange bearing used for?
This flange-mount tapered roller bearing supports heavy radial and axial loads in industrial machinery such as conveyors, fans, and pumps. The cast iron housing and set screws provide secure shaft mounting, while lithium complex grease reduces maintenance intervals in demanding environments.
What are the specifications of the MOLINE BEARING flange bearing 19311308?
This bearing has a 3 1/2 in cylindrical bore, a cast iron housing with set screws, and a 9 1/4 in length. It uses lithium complex grease, requires a 3/4 in mounting bolt, and is designed to inch-system measurements. The manufacturer part number is 19311308.
Where to buy MOLINE BEARING flange bearing 19311308 worldwide?
3G Electric supplies and delivers the MOLINE BEARING flange bearing 19311308 to worldwide locations. As a global industrial solutions provider, we handle full logistics and customs clearance so you receive the correct inch-system tapered roller bearing for your application.
How to install a MOLINE BEARING flange bearing with set screws?
Align the bearing flange to the mounting surface and tighten the 3/4 in bolts. Slide the shaft through the 3 1/2 in bore, then tighten the set screws evenly against the shaft. Apply lithium complex grease per the manufacturer's schedule to ensure proper tapered roller operation.
Digunakan dalam
Aplikasi umum untuk MOLINE BEARINGMOLINE BEARING Produk
3G Electric memasok MOLINE BEARING flange-mount tapered roller bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
