MONROE PMP Pull Handle: Threaded Holes, Aluminum, Silver, #8-32 Screw Size
The MONROE PMP Standard Pull Handle (MPN PH-0172) is a fixed, non-recessed aluminum handle in a dull silver finish with threaded mounting holes and a #8-32 screw size. It features a 0.25 in grip thickness and is…
SKU 3G-OTH-514947
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MONROE PMP Standard Pull Handle (MPN PH-0172) is a fixed, non-recessed aluminum handle in a dull silver finish with threaded mounting holes and a #8-32 screw size. It features a 0.25 in grip thickness and is designed for straightforward installation in industrial equipment requiring a durable, fixed pull point.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MONROE PMP PH-0172 pull handle used for?
The MONROE PMP PH-0172 is a fixed, non-recessed aluminum pull handle designed for industrial equipment requiring a durable, permanent pull point. It is commonly installed on machinery cabinets, control panels, and access doors where a silver, dull-finish handle with threaded #8-32 mounting holes is needed.
What are the specifications of the MONROE PMP PH-0172 pull handle?
The MONROE PMP PH-0172 is a fixed, non-recessed aluminum handle in a dull silver finish. It has a #8-32 screw size, threaded mounting holes, and a 0.25 in grip thickness. The handle is non-folding and designed for permanent installation on industrial equipment.
Where to buy the MONROE PMP PH-0172 pull handle worldwide?
3G Electric supplies the MONROE PMP PH-0172 pull handle worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us to source this fixed aluminum handle with #8-32 threaded holes for your application.
How to install the MONROE PMP PH-0172 pull handle?
To install the MONROE PMP PH-0172, align the handle's threaded holes with pre-drilled #8-32 screw holes on the panel. Insert and tighten screws from the rear side using a standard screwdriver. Ensure the handle sits flush against the surface for a secure, fixed pull point.
MONROE PMP Produk
3G Electric memasok MONROE PMP standard pull handles. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
