MONROE PMP Pull Handle: Unthreaded Holes, Plastic, Black, 1/4 in Screw Size
The MONROE PMP Standard Pull Handle (SKU 4LAF5, MPN PH-0258) is a fixed, non-recessed phenolic handle in black with an unfinished finish. It features unthreaded mounting holes and a 1/4 in screw size, with a grip…
SKU 3G-OTH-514883
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MONROE PMP Standard Pull Handle (SKU 4LAF5, MPN PH-0258) is a fixed, non-recessed phenolic handle in black with an unfinished finish. It features unthreaded mounting holes and a 1/4 in screw size, with a grip thickness of 0.38 in.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MONROE PMP PH-0258 pull handle used for?
The MONROE PMP PH-0258 is a fixed, non-recessed phenolic pull handle used on industrial cabinets, enclosures, and machinery doors. Its unthreaded mounting holes and 1/4 in screw size allow secure attachment to panels, providing a durable grip for frequent opening and closing in workshops and factories.
What are the specifications of the MONROE PMP PH-0258 pull handle?
The MONROE PMP PH-0258 is a black phenolic handle with an unfinished finish. It has a fixed folding type, non-recessed projection, unthreaded mounting holes, a 1/4 in screw size, and a grip thickness of 0.38 in. The material family is plastic, and the manufacturer part number is PH-0258.
Where to buy the MONROE PMP PH-0258 pull handle worldwide?
3G Electric supplies the MONROE PMP PH-0258 pull handle to customers worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this phenolic handle with unthreaded holes and 1/4 in screw size to your facility, regardless of location.
How to install the MONROE PMP PH-0258 pull handle?
To install the MONROE PMP PH-0258, align the unthreaded holes with pre-drilled panel holes, insert 1/4 in screws through the handle into the panel, and tighten from the rear using nuts. Ensure the handle sits flush against the surface for a secure, non-recessed fit. Use standard hardware not included.
MONROE PMP Produk
3G Electric memasok MONROE PMP standard pull handles. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
