MONROE PMP Pull Handle: Threaded Holes, Stainless Steel, Silver, 1/4"-20 Screw Size
The MONROE PMP Standard Pull Handle (MPN AN-0757) is a fixed, non-recessed stainless steel handle in a dull silver finish, with a 1 in projection and threaded holes for 1/4"-20 screws. 3G Electric sources this…
SKU 3G-OTH-515032
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MONROE PMP Standard Pull Handle (MPN AN-0757) is a fixed, non-recessed stainless steel handle in a dull silver finish, with a 1 in projection and threaded holes for 1/4"-20 screws. 3G Electric sources this genuine industrial handle across 14 departments — and far more — with specialist depth in combustion, pumps and controls as a trust anchor, not a limit.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MONROE PMP AN-0757 pull handle used for?
The MONROE PMP AN-0757 is a fixed, non-recessed stainless steel pull handle used on industrial enclosures, machinery doors, and control panels. Its dull silver finish resists corrosion, and the 1/4"-20 threaded holes allow secure mounting. 3G Electric supplies this handle globally across 14 industrial departments.
What are the specifications of the MONROE PMP AN-0757 pull handle?
The MONROE PMP AN-0757 is a stainless steel pull handle with a dull silver finish, 1 in projection, fixed folding type, and non-recessed mounting. It uses 1/4"-20 screw size threaded holes. The manufacturer part number is AN-0757. 3G Electric sources this genuine handle for worldwide delivery.
Where to buy the MONROE PMP AN-0757 pull handle worldwide?
3G Electric supplies the MONROE PMP AN-0757 pull handle to customers worldwide. We handle full logistics, customs clearance, and delivery to your facility. As a global industrial solutions provider, we source this genuine stainless steel handle across 14 departments, with specialist expertise in combustion, pumps, and controls.
How to install the MONROE PMP AN-0757 pull handle?
To install the MONROE PMP AN-0757, align the handle's threaded holes with pre-drilled 1/4"-20 tapped holes on the panel or door. Insert and tighten screws evenly to avoid warping. Use thread-locking compound for vibration resistance. 3G Electric provides sourcing support but recommends consulting a qualified technician for installation.
MONROE PMP Produk
3G Electric memasok MONROE PMP standard pull handles. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
