MURRELEKTRONIK Cordset: M8 Male Straight X Bare Wire, 3 Pins, Yellow, PVC, 15 m Cable Lg
The MURRELEKTRONIK Cordset: M8 Male Straight X Bare Wire is a single-ended cordset with a PVC jacket for flexing applications. It features an M8 male straight connector on one end and bare wire on the other, with 24…
SKU 3G-OTH-49107
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MURRELEKTRONIK Cordset: M8 Male Straight X Bare Wire is a single-ended cordset with a PVC jacket for flexing applications. It features an M8 male straight connector on one end and bare wire on the other, with 24 AWG wire size, a yellow PVC jacket, and an IP65 rating.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MURRELEKTRONIK M8 cordset used for?
This single-ended cordset connects sensors and actuators in industrial automation, packaging, and material handling. The M8 male straight connector mates with compatible devices, while the bare-wire end terminates in a control cabinet. The yellow PVC jacket and IP65 rating suit flexing applications in factory-floor environments.
What are the specifications of the MURRELEKTRONIK 7000-08001-0101500 cordset?
This cordset has 3 pins, 24 AWG wire, a 15 m cable length, and a yellow PVC jacket. End 1 is an M8 male straight connector; End 2 is bare wire. It is rated IP65 for dust and water ingress protection. The manufacturer part number is 7000-08001-0101500.
Where to buy the MURRELEKTRONIK M8 cordset worldwide?
3G Electric supplies and delivers this MURRELEKTRONIK cordset worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure the cordset reaches your facility. Contact us for pricing and lead time on this part number.
How to install the MURRELEKTRONIK M8 cordset with bare wire?
Connect the M8 male straight end to the sensor or actuator port and tighten the coupling nut by hand. Strip the bare-wire end to the recommended length and terminate into a terminal block or connector inside the control cabinet. Ensure the cable is routed without sharp bends to maintain the IP65 seal.
Digunakan dalam
Aplikasi umum untuk MURRELEKTRONIKMURRELEKTRONIK Produk
3G Electric memasok MURRELEKTRONIK single-ended cordsets with pvc jacket for flexing applications. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

