MURRELEKTRONIK Cordset: M8 Male Straight X Bare Wire, 3 Pins, Black, PVC, 15 m Cable Lg
The MURRELEKTRONIK Cordset is a single-ended cordset with a PVC jacket for flexing applications, featuring an M8 male straight connector on one end and bare wire on the other. It has 3 pins, a 15 m cable length, 24…
SKU 3G-OTH-47353
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MURRELEKTRONIK Cordset is a single-ended cordset with a PVC jacket for flexing applications, featuring an M8 male straight connector on one end and bare wire on the other. It has 3 pins, a 15 m cable length, 24 AWG wire size, and a black PVC jacket. The cordset is rated IP66K.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MURRELEKTRONIK 7000-08001-6101500 cordset used for?
This single-ended cordset with a PVC jacket is designed for flexing applications in industrial automation, sensors, and actuators. It provides a reliable M8 male connection to bare wire for signal or low-power transmission in harsh environments, rated IP66K for dust and high-pressure water protection.
What are the specifications of the MURRELEKTRONIK M8 cordset?
The cordset has 3 pins, 24 AWG wire size, 15 m cable length, black PVC jacket, M8 male straight connector on one end, and bare wire on the other. It is rated IP66K and manufactured by MURRELEKTRONIK under part number 7000-08001-6101500.
Where to buy the MURRELEKTRONIK 7000-08001-6101500 worldwide?
3G Electric supplies and delivers this MURRELEKTRONIK cordset worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure the part reaches your facility, regardless of location. Contact us for availability and lead time.
How to install a MURRELEKTRONIK M8 cordset with bare wire?
Strip the bare wire ends to the recommended length, typically 6–8 mm, and connect to your terminal block or controller per the wiring diagram. Ensure the M8 male connector is fully seated and tightened by hand to maintain the IP66K seal. Avoid sharp bends near the connector to prevent cable stress.
Digunakan dalam
Aplikasi umum untuk MURRELEKTRONIKMURRELEKTRONIK Produk
3G Electric memasok MURRELEKTRONIK single-ended cordsets with pvc jacket for flexing applications. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















