MURRELEKTRONIK Cordset: M8 Female Straight X Bare Wire, 3 Pins, Gray, PVC, 10 m Cable Lg
The MURRELEKTRONIK Cordset is a single-ended cordset with a PVC jacket for flexing applications, featuring an M8 female straight connector on one end and bare wire on the other. It has 3 pins, 24 AWG wire size, a…
SKU 3G-OTH-47245
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MURRELEKTRONIK Cordset is a single-ended cordset with a PVC jacket for flexing applications, featuring an M8 female straight connector on one end and bare wire on the other. It has 3 pins, 24 AWG wire size, a gray PVC cable jacket, and an IP65 rating. The cable length is 10 meters.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MURRELEKTRONIK 7000-08041-2101000 cordset used for?
This MURRELEKTRONIK cordset is used for flexing applications in industrial automation, connecting sensors or actuators to control systems. Its M8 female straight connector and bare wire end simplify wiring in tight spaces, while the PVC jacket and IP65 rating protect against dust and water jets.
What are the specifications of the MURRELEKTRONIK 7000-08041-2101000 cordset?
This cordset has 3 pins, 24 AWG wire size, a 10 m cable length, and a gray PVC jacket. It features an M8 female straight connector on one end and bare wire on the other, with an IP65 rating. The manufacturer part number is 7000-08041-2101000.
Where to buy the MURRELEKTRONIK 7000-08041-2101000 cordset worldwide?
3G Electric supplies the MURRELEKTRONIK 7000-08041-2101000 cordset worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this M8 cordset to your facility, ensuring compliance with international shipping requirements.
How to install the MURRELEKTRONIK M8 cordset with bare wire?
To install, connect the M8 female straight connector to the sensor or actuator port, then terminate the bare wire ends into a terminal block or control system per your wiring diagram. Ensure the cable is routed to avoid sharp bends, and verify the IP65 seal is intact after installation.
Digunakan dalam
Aplikasi umum untuk MURRELEKTRONIKMURRELEKTRONIK Produk
3G Electric memasok MURRELEKTRONIK single-ended cordsets with pvc jacket for flexing applications. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















