MURRELEKTRONIK Cordset: M8 Female Straight X Bare Wire, 4 Pins, Gray, PVC, 7.5 m Cable Lg
The MURRELEKTRONIK Cordset is a single-ended cordset with a PVC jacket for flexing applications, featuring an M8 female straight connector on one end and bare wire on the other. It has 4 pins, 24 AWG wire size, a…
SKU 3G-OTH-48615
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The MURRELEKTRONIK Cordset is a single-ended cordset with a PVC jacket for flexing applications, featuring an M8 female straight connector on one end and bare wire on the other. It has 4 pins, 24 AWG wire size, a gray PVC cable jacket, and an IP67 rating. The cable length is 7.5 m.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the MURRELEKTRONIK 7000-08061-2110750 cordset used for?
This MURRELEKTRONIK cordset is used for flexing applications in industrial automation, connecting sensors or actuators to control systems. Its M8 female straight connector and bare wire end allow reliable signal or power transmission in tight spaces, with IP67 protection against dust and water.
What are the specifications of the MURRELEKTRONIK 7000-08061-2110750 cordset?
This cordset has an M8 female straight connector on one end and bare wire on the other, with 4 pins, 24 AWG wire size, and a 7.5 m gray PVC cable. It is rated IP67 for dust and water ingress protection, making it suitable for harsh industrial environments.
Where to buy the MURRELEKTRONIK 7000-08061-2110750 cordset worldwide?
You can source the MURRELEKTRONIK 7000-08061-2110750 cordset from 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring you receive genuine MURRELEKTRONIK components for your automation needs.
How to install the MURRELEKTRONIK M8 cordset with bare wire?
To install, connect the M8 female straight connector to the mating male port on your sensor or device, ensuring the locking collar is tightened. Strip the bare wire ends to the recommended length and terminate them in a terminal block or controller, following the pinout for 4-pin configurations.
Digunakan dalam
Aplikasi umum untuk MURRELEKTRONIKMURRELEKTRONIK Produk
3G Electric memasok MURRELEKTRONIK single-ended cordsets with pvc jacket for flexing applications. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















