NIBCOLow-Lead Cast Copper & Bronze Tube Fittings

NIBCO Sweat Fitting Tee: 1/2 in CTS x 1/2 in CTS x 1/2 in CTS, Cup x Cup x Cup

SKU 3G-OTH-485592

Merek

NIBCO

Item

Sweat Fitting Tee: 1/2 in CTS x 1/2 in CTS x 1/2 in CTS, Cup x Cup x Cup

Kategori

Low-Lead Cast Copper & Bronze Tube Fittings

Tersedia untuk Dipesan

Stok tersedia & bea cukai ditangani

6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam

Harga dagang sesuai penawaran — balasan dalam 24 jam

Jumlah

WhatsApp seorang insinyur

Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.

Buat akun gratis →Masuk

Pengiriman ke Seluruh Dunia

Pengiriman udara & laut

Lembar Data Atas Permintaan

Spesifikasi teknis

Penawaran 1 Hari

Balasan dalam 24 jam

Spesifikasi Teknis

NIBCO

Manufacturer Part Number

749-LF 1/2 

Type

Cup x Cup x Cup, Low Lead Bronze 

Lihat Lembar Spesifikasi Lengkap

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.

Minta dokumentasi →

Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.

Bicaralah dengan seorang insinyur

Ajukan pertanyaan

NIBCO Produk

3G Electric (S) Pte. Ltd. — Singapore

Pertanyaan yang Sering Diajukan

What is NIBCO 749-LF 1/2 sweat fitting tee used for?

This NIBCO low-lead bronze tee connects three 1/2-inch CTS copper tubes in plumbing systems. It is used in potable water, hydronic heating, and industrial piping where lead-free compliance is required. The cup x cup x cup design allows sweat-soldered joints for reliable, leak-free connections.

What are the specifications of NIBCO 749-LF 1/2 sweat fitting tee?

The NIBCO 749-LF 1/2 is a low-lead bronze tee with three 1/2-inch CTS cup ends. It is a cup x cup x cup configuration for sweat (solder) connections. The low-lead bronze material meets lead-free requirements for potable water systems. Manufacturer part number is 749-LF 1/2.

Where to buy NIBCO 749-LF 1/2 sweat fitting tee worldwide?

3G Electric supplies and delivers the NIBCO 749-LF 1/2 low-lead bronze sweat tee worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this part. We source genuine NIBCO fittings for global industrial and plumbing applications.

How to install NIBCO 749-LF 1/2 sweat fitting tee?

Clean tube ends and fitting cups with emery cloth. Apply flux to both surfaces. Assemble and heat evenly with a propane torch until solder melts into the joint. Remove heat and let cool without disturbing. Use lead-free solder for potable water systems. Follow local plumbing codes for best results.

Digunakan dalam

Aplikasi umum untuk NIBCO

HVAC systems — NIBCO bronze ball valves (T58570UL series) for isolation and control in chilled water loops

Water treatment plants — NIBCO bronze gate valves (T29 series) for shut-off in filtration and distribution lines

Industrial burner systems — NIBCO brass ball valves (GB2A series) for fuel oil or gas supply lines

Chemical processing — NIBCO bronze ball valves with locking lever (T58570LL series) for safety-critical flow control

Steam systems — NIBCO bronze globe valves for throttling in low-pressure steam applications

General plumbing — NIBCO bronze ball valves (S58570 series) with sweat connections for copper piping in commercial buildings

NIBCO Produk

3G Electric memasok NIBCO low-lead cast copper & bronze tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Jelajahi semua NIBCO produk →Hubungi insinyur kami →