NTN 4 Bolt Flange Bearing: Radial Ball, 1 15/16 in Bore, Cast Iron, Set Screws
The NTN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 15/16 in cylindrical bore and a cast iron housing. It features set screws for shaft locking and is lubricated with NLGI #3…
SKU 3G-OTH-111563
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The NTN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 15/16 in cylindrical bore and a cast iron housing. It features set screws for shaft locking and is lubricated with NLGI #3 equivalent grease. The mounting bolt size is 5/8 in, and the system of measurement is inch. The manufacturer part number is UCFU-1.15/16MFG1.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the NTN 4 Bolt Flange Bearing used for?
The NTN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing used to support rotating shafts in industrial machinery, conveyors, and material handling equipment. Its cast iron housing and set screw locking provide reliable shaft retention in moderate-load applications.
What are the specifications of the NTN UCFU-1.15/16MFG1 flange bearing?
This NTN bearing has a 1 15/16 in cylindrical bore, cast iron housing with set screws, and a 5 41/64 in length. It uses NLGI #3 equivalent grease, requires a 5/8 in mounting bolt, and is an inch-system component. The manufacturer part number is UCFU-1.15/16MFG1.
Where to buy the NTN 4 Bolt Flange Bearing worldwide?
3G Electric supplies the NTN 4 Bolt Flange Bearing worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on this NTN UCFU-1.15/16MFG1 bearing.
How to install the NTN flange bearing with set screws?
To install, align the bearing unit on the mounting surface and tighten the 5/8 in bolts. Secure the shaft by tightening the set screws evenly against the shaft using a hex key. Ensure the shaft is clean and lubricated per NTN recommendations to avoid misalignment.
Digunakan dalam
Aplikasi umum untuk NTNNTN Produk
3G Electric memasok NTN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
