NTN 2 Bolt Flange Bearing: Radial Ball, 1 9/16 in Bore, Cast Iron, Set Screws
The NTN 2 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 9/16 in cylindrical bore. This inch-system unit features a cast iron housing, set screw locking, and a 6 25/32 in length…
SKU 3G-OTH-113392
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The NTN 2 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 9/16 in cylindrical bore. This inch-system unit features a cast iron housing, set screw locking, and a 6 25/32 in length, lubricated with NLGI #3 equivalent grease. It uses 1/2 in mounting bolts.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the NTN 2 Bolt Flange Bearing used for?
The NTN 2 Bolt Flange Bearing is used in industrial conveyor systems, material handling equipment, and agricultural machinery to support rotating shafts. Its flange-mount design allows easy bolt-on installation to a flat surface, providing reliable radial load support in general-purpose applications.
What are the specifications of the NTN UCFLU-1.9/16M flange bearing?
This NTN bearing has a 1 9/16 in cylindrical bore, cast iron housing, set screw locking, and a 6 25/32 in length. It uses 1/2 in mounting bolts and is lubricated with NLGI #3 equivalent grease. The system of measurement is inch, and the MPN is UCFLU-1.9/16M.
Where to buy the NTN UCFLU-1.9/16M flange bearing worldwide?
You can source the NTN UCFLU-1.9/16M flange bearing from 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time.
How to install the NTN 2 Bolt Flange Bearing?
Mount the bearing on a clean, flat surface using 1/2 in bolts through the two housing flanges. Align the shaft with the bore, tighten set screws onto the shaft, and apply NLGI #3 equivalent grease if needed. Ensure proper shaft alignment to avoid premature wear.
Digunakan dalam
Aplikasi umum untuk NTNNTN Produk
3G Electric memasok NTN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
