NTN 4 Bolt Flange Bearing: Radial Ball, 1 7/16 in Bore, Cast Iron, Set Screws
The NTN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 7/16 in cylindrical bore. This inch-system unit features a cast iron housing, set screw locking, and a 4 21/32 in length, with a…
SKU 3G-OTH-110929
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The NTN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 7/16 in cylindrical bore. This inch-system unit features a cast iron housing, set screw locking, and a 4 21/32 in length, with a mounting bolt size of 1/2 in. It is lubricated with NLGI #3 equivalent grease.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the NTN 4 Bolt Flange Bearing used for?
The NTN 4 Bolt Flange Bearing is used to support rotating shafts in industrial machinery, conveyors, and material handling equipment. Its square cast iron housing with set screw locking provides secure mounting on flat surfaces, making it suitable for general purpose applications where radial loads and moderate speeds are present.
What are the specifications of the NTN UCFU-1.7/16M flange bearing?
The NTN UCFU-1.7/16M has a 1 7/16 in cylindrical bore, cast iron housing, set screw locking, and a 4 21/32 in length. It uses NLGI #3 equivalent grease, a 1/2 in mounting bolt size, and is an inch-system unit. This 4 bolt flange bearing is designed for radial ball bearing applications.
Where to buy NTN flange bearings in worldwide?
You can source NTN flange bearings worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead times on the NTN UCFU-1.7/16M and other NTN bearing models.
How to install an NTN 4 bolt flange bearing?
To install the NTN 4 bolt flange bearing, first ensure the mounting surface is flat and clean. Align the bearing's bolt holes with the 1/2 in mounting bolts and tighten evenly to avoid housing distortion. Secure the shaft using the set screws, then apply NLGI #3 equivalent grease as needed. Follow NTN's generic installation guidelines for best results.
Digunakan dalam
Aplikasi umum untuk NTNNTN Produk
3G Electric memasok NTN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
