NTN 4 Bolt Flange Bearing: Radial Ball, 2 in Bore, Cast Iron, Set Screws
The NTN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 2 in cylindrical bore and a cast iron housing. It features set screws for shaft locking and uses NLGI #3 equivalent lubricant. The…
SKU 3G-OTH-117589
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The NTN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 2 in cylindrical bore and a cast iron housing. It features set screws for shaft locking and uses NLGI #3 equivalent lubricant. The mounting bolt size is 5/8 in, and the unit has a square configuration with a 5 41/64 in length. This inch-system bearing is identified by manufacturer part number UCFU-2SM.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the NTN 4 Bolt Flange Bearing used for?
The NTN 4 Bolt Flange Bearing is used in industrial applications requiring radial load support and shaft alignment, such as conveyors, fans, and material handling equipment. Its cast iron housing and set screw locking provide secure mounting on cylindrical shafts.
What are the specifications of the NTN UCFU-2SM flange bearing?
The NTN UCFU-2SM is a 4 bolt flange bearing with a 2 in cylindrical bore, cast iron housing, and set screw shaft locking. It uses NLGI #3 equivalent lubricant, has a 5/8 in mounting bolt size, and a square configuration with 5 41/64 in length. System of measurement is inch.
Where to buy the NTN 4 Bolt Flange Bearing worldwide?
You can source the NTN 4 Bolt Flange Bearing worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install the NTN UCFU-2SM flange bearing?
To install the NTN UCFU-2SM, first clean the shaft and housing bore. Slide the bearing onto the shaft, align the flange bolt holes, and tighten the 5/8 in mounting bolts evenly. Secure the shaft by tightening the set screws against the shaft. Apply NLGI #3 equivalent grease if needed.
Digunakan dalam
Aplikasi umum untuk NTNNTN Produk
3G Electric memasok NTN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
