NTN Pillow Block Bearing: 2 15/16 in Bore, Cast Iron, Set Screws, 3 31/64 in Shaft Ht
The NTN Pillow Block Bearing is a medium duty pillow block ball bearing with a 2 15/16 in bore, cast iron housing, and set screw locking. It has a maximum speed of 1,900 RPM, a mounting bolt size of 3/4 in, and a…
SKU 3G-OTH-103158
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The NTN Pillow Block Bearing is a medium duty pillow block ball bearing with a 2 15/16 in bore, cast iron housing, and set screw locking. It has a maximum speed of 1,900 RPM, a mounting bolt size of 3/4 in, and a shaft height of 3 31/64 in. This inch-system bearing is identified by manufacturer part number UCPX-2.15/16M.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the NTN UCPX-2.15/16M pillow block bearing used for?
The NTN UCPX-2.15/16M is a medium duty pillow block ball bearing used in industrial equipment such as conveyors, fans, and pumps. It supports rotating shafts with a 2 15/16 in bore, handling radial and moderate thrust loads at speeds up to 1,900 RPM.
What are the specifications of the NTN UCPX-2.15/16M pillow block bearing?
This NTN bearing has a 2 15/16 in bore, cast iron housing with set screw locking, and a shaft height of 3 31/64 in. It uses a 3/4 in mounting bolt, operates at a maximum speed of 1,900 RPM, and follows the inch system of measurement (MPN UCPX-2.15/16M).
Where to buy the NTN UCPX-2.15/16M pillow block bearing worldwide?
3G Electric supplies the NTN UCPX-2.15/16M pillow block bearing worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time.
How to install the NTN UCPX-2.15/16M pillow block bearing?
To install, mount the cast iron housing on a flat surface using 3/4 in bolts, align the shaft with the 2 15/16 in bore, and tighten the set screws evenly. Ensure the shaft is clean and lubricated. Follow NTN's generic installation guidelines for proper fit and alignment.
Digunakan dalam
Aplikasi umum untuk NTNNTN Produk
3G Electric memasok NTN medium duty pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
