NTN Pillow Block Bearing: 3/4 in Bore, Cast Iron, Set Screws, 1 19/64 in Shaft Ht
The NTN Pillow Block Bearing (SKU 5ZMX2, MPN ARP-3/4) is a light duty pillow block ball bearing with a 3/4 in bore, constructed from cast iron and featuring set screws. It has a maximum speed of 5,000 RPM, a mounting…
SKU 3G-OTH-105546
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The NTN Pillow Block Bearing (SKU 5ZMX2, MPN ARP-3/4) is a light duty pillow block ball bearing with a 3/4 in bore, constructed from cast iron and featuring set screws. It has a maximum speed of 5,000 RPM, a mounting bolt size of M10, a shaft height of 1 19/64 in, and an overall length of 5 in, measured in inches.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the NTN ARP-3/4 pillow block bearing used for?
The NTN ARP-3/4 is a light duty pillow block ball bearing used to support rotating shafts in industrial equipment such as conveyors, fans, and agricultural machinery. Its cast iron housing and set screw locking provide reliable shaft retention in moderate-load applications.
What are the specifications of the NTN ARP-3/4 pillow block bearing?
The NTN ARP-3/4 has a 3/4 in bore, cast iron housing with set screws, a maximum speed of 5,000 RPM, mounting bolt size M10, shaft height 1 19/64 in, and overall length 5 in. It uses inch-system measurements and is manufactured by NTN.
Where to buy the NTN ARP-3/4 pillow block bearing worldwide?
3G Electric supplies the NTN ARP-3/4 pillow block bearing worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install the NTN ARP-3/4 pillow block bearing?
To install the NTN ARP-3/4, align the bearing with the shaft, tighten the set screws onto the shaft flat, and secure the housing using M10 bolts. Ensure the shaft is clean and lubricated. Follow standard pillow block installation practices for proper alignment and load distribution.
Digunakan dalam
Aplikasi umum untuk NTNNTN Produk
3G Electric memasok NTN light duty pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
