NTN 2 Bolt Flange Bearing: Radial Ball, 15/16 in Bore, Cast Iron, Set Screws
The NTN 2 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 15/16 in cylindrical bore, cast iron housing, and set screw locking. It uses NLGI #3 equivalent lubricant, has a 5/8 in mounting…
SKU 3G-OTH-111886
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The NTN 2 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 15/16 in cylindrical bore, cast iron housing, and set screw locking. It uses NLGI #3 equivalent lubricant, has a 5/8 in mounting bolt size, and is supplied in inch measurements (MPN UCFL205-015D1).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the NTN 2 Bolt Flange Bearing used for?
The NTN 2 Bolt Flange Bearing is used in industrial conveyor systems, material handling equipment, and agricultural machinery to support rotating shafts. Its cast iron housing and set screw locking provide secure mounting in applications requiring radial load support and misalignment accommodation.
What are the specifications of the NTN UCFL205-015D1 flange bearing?
The NTN UCFL205-015D1 has a 15/16 in cylindrical bore, cast iron rhombus housing, set screw locking, and NLGI #3 equivalent lubricant. It measures 5 1/8 in length, uses a 5/8 in mounting bolt, and is supplied in inch measurements. This is a general purpose flange-mount ball bearing.
Where to buy the NTN 2 Bolt Flange Bearing worldwide?
3G Electric supplies the NTN 2 Bolt Flange Bearing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on the NTN UCFL205-015D1.
How to install the NTN 2 Bolt Flange Bearing?
To install the NTN flange bearing, first ensure the shaft is clean and free of burrs. Slide the bearing onto the shaft, align the bolt holes, and tighten the mounting bolts to the recommended torque. Then secure the set screws against the shaft using a hex key. Lubrication is pre-applied with NLGI #3 grease.
Digunakan dalam
Aplikasi umum untuk NTNNTN Produk
3G Electric memasok NTN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
