Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
NVENT CADDY Standard Loop Hanger for 5 in Pipe - Standard Loop Hangers for Tube & Pipe
NVENT CADDYStandard Loop Hangers for Tube & Pipe

NVENT CADDY Standard Loop Hanger for 5 in Pipe

NVENT CADDY menghadirkan Swivel Loop Hanger tipe Standard Loop Hangers for Tube & Pipe yang terbuat dari baja pre-galvanized. Produk ini dirancang khusus untuk pipa berukuran 5 in dan batang berulir 1/2 in…

SKU 3G-OTH-651849

Juga terdaftar sebagai: 1150500 EG · 1150500-EG

Merek
NVENT CADDY
Item
Standard Loop Hanger for 5 in Pipe
Kategori
Standard Loop Hangers for Tube & Pipe
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

NVENT CADDY
Manufacturer Part Number
1150500EG
Type
For 5 in Pipe, For 1/2 in Threaded Rod
Cushioned
No
Hanger Material
Steel
For Threaded Rod Size
1/2 in
Hanger Material Finish
Pre-Galvanized

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

NVENT CADDY Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

NVENT CADDY menghadirkan Swivel Loop Hanger tipe Standard Loop Hangers for Tube & Pipe yang terbuat dari baja pre-galvanized. Produk ini dirancang khusus untuk pipa berukuran 5 in dan batang berulir 1/2 in, memberikan solusi penggantungan yang kokoh dan tahan lama untuk instalasi perpipaan industri. Dengan material baja pre-galvanized, hanger ini menawarkan ketahanan korosi yang optimal untuk berbagai aplikasi di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa NVENT CADDY Swivel Loop Hanger digunakan?

NVENT CADDY Swivel Loop Hanger digunakan untuk menggantung pipa berukuran 5 in pada batang berulir 1/2 in. Produk ini ideal untuk instalasi perpipaan di sektor industri seperti pabrik kelapa sawit, semen, dan fasilitas manufaktur.

Apa spesifikasi NVENT CADDY Swivel Loop Hanger 1150500EG?

Spesifikasi produk ini meliputi: tipe untuk pipa 5 in dan batang berulir 1/2 in, material baja dengan finishing pre-galvanized, tidak dilengkapi bantalan (non-cushioned), dan nomor part pabrikan 1150500EG.

Di mana beli NVENT CADDY Swivel Loop Hanger di Indonesia?

Anda dapat membeli NVENT CADDY Swivel Loop Hanger 1150500EG melalui 3G Electric, distributor resmi yang memasok dan mengirimkan peralatan industri ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Bagaimana cara memilih Swivel Loop Hanger yang tepat untuk pipa 5 in?

Pastikan Anda memilih hanger yang sesuai dengan ukuran pipa (5 in) dan diameter batang berulir (1/2 in). NVENT CADDY 1150500EG dengan material baja pre-galvanized cocok untuk lingkungan yang memerlukan ketahanan korosi tanpa perlu bantalan tambahan.

Digunakan dalam

Aplikasi umum untuk NVENT CADDY
Industrial manufacturing — NVENT CADDY K8 cable conduit clip hanger for securing 1/2 in conduit in control panels
Data center cabling — NVENT CADDY CAT1224SM J-hook clamp for managing cable bundles on overhead beams
Commercial electrical — NVENT CADDY MP2S communication mounting bracket for low-voltage device installation in walls
Utility infrastructure — NVENT CADDY 4BRT32WS bridle ring for supporting 2 in conduit on studs in substations
HVAC systems — NVENT CADDY 16M24SM beam clip with hanger for mounting pipe and conduit on steel beams
Telecommunications — NVENT CADDY MP1P ABS mounting bracket for single-gang low-voltage outlets in office spaces

NVENT CADDY Produk

3G Electric memasok NVENT CADDY standard loop hangers for tube & pipe. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Lainnya dari NVENT CADDY

Lihat semua NVENT CADDY suku cadang →
This standard loop hanger supports 1 1/2 in pipe from 3/8 in threaded rod. Made of 304 stainless steel, it offers corrosion resistance for use in piping systems. Non-cushioned design with a load capacity of 610 lb
NVENT CADDY
This standard loop hanger supports 1 1/2 in pipe from 3/8 in threaded rod. Made of 304 stainless steel, it offers corrosion resistance for use in piping systems. Non-cushioned design with a load capacity of 610 lb
Pre-galvanized steel loop hanger for suspending 1/2 in pipe from 3/8 in threaded rod. Non-cushioned design with a load capacity of 300 lb. Suitable for supporting piping in HVAC, plumbing, and mechanical systems
NVENT CADDY
Pre-galvanized steel loop hanger for suspending 1/2 in pipe from 3/8 in threaded rod. Non-cushioned design with a load capacity of 300 lb. Suitable for supporting piping in HVAC, plumbing, and mechanical systems
This standard loop hanger is designed to suspend 1 1/2 in pipe from 3/8 in threaded rod. Made of steel with a copper-plated finish, it offers corrosion resistance for use in piping support systems. Load capacity is 180 lb. Suitable for HVAC, plumbing, and mechanical applications
NVENT CADDY
This standard loop hanger is designed to suspend 1 1/2 in pipe from 3/8 in threaded rod. Made of steel with a copper-plated finish, it offers corrosion resistance for use in piping support systems. Load capacity is 180 lb. Suitable for HVAC, plumbing, and mechanical applications
Pre-galvanized steel loop hanger for supporting 8 in pipe. Designed for use with 1/2 in threaded rod. Non-cushioned with a load capacity of 1,000 lb. Suitable for tube and pipe installations requiring direct support
NVENT CADDY
Pre-galvanized steel loop hanger for supporting 8 in pipe. Designed for use with 1/2 in threaded rod. Non-cushioned with a load capacity of 1,000 lb. Suitable for tube and pipe installations requiring direct support
Pre-galvanized steel loop hanger for suspending 1 1/2 in pipe from 3/8 in threaded rod. Supports up to 300 lb. Non-cushioned design suitable for HVAC, plumbing, and mechanical piping systems
NVENT CADDY
Pre-galvanized steel loop hanger for suspending 1 1/2 in pipe from 3/8 in threaded rod. Supports up to 300 lb. Non-cushioned design suitable for HVAC, plumbing, and mechanical piping systems
This standard loop hanger supports 2 in pipe from 3/8 in threaded rod. Made of steel with a copper-plated finish, it has a load capacity of 180 lb and is non-cushioned. Used in piping systems for suspension of tube and pipe
NVENT CADDY
This standard loop hanger supports 2 in pipe from 3/8 in threaded rod. Made of steel with a copper-plated finish, it has a load capacity of 180 lb and is non-cushioned. Used in piping systems for suspension of tube and pipe
This standard loop hanger is made of pre-galvanized steel and designed to support 2 1/2 in pipe using 1/2 in threaded rod. It is a non-cushioned hanger suitable for securing piping in mechanical and plumbing systems
NVENT CADDY
This standard loop hanger is made of pre-galvanized steel and designed to support 2 1/2 in pipe using 1/2 in threaded rod. It is a non-cushioned hanger suitable for securing piping in mechanical and plumbing systems
Standard loop hanger for supporting 1/2 in pipe from 3/8 in threaded rod. Made of 304 stainless steel with a load capacity of 610 lb. Non-cushioned design for use in industrial piping systems requiring corrosion resistance
NVENT CADDY
Standard loop hanger for supporting 1/2 in pipe from 3/8 in threaded rod. Made of 304 stainless steel with a load capacity of 610 lb. Non-cushioned design for use in industrial piping systems requiring corrosion resistance