NVENT CADDY Conduit & Cable Hanger - Screw-On: Galvanized, 3/4 in Trade Size, 3/4 in
The NVENT CADDY CD1B is a screw-on conduit and cable hanger for 3/4 in trade size EMT or RMC, made of galvanized steel with a gray finish. It supports a load capacity of 50 lb and accommodates cable diameters from…
SKU 3G-OTH-04747
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The NVENT CADDY CD1B is a screw-on conduit and cable hanger for 3/4 in trade size EMT or RMC, made of galvanized steel with a gray finish. It supports a load capacity of 50 lb and accommodates cable diameters from 0.74 in to 1.05 in, with a 3/4 in flange thickness and 0.25 in mounting hole diameter. This cULus-listed hanger is designed for use with cable and is manufactured in the USA.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the NVENT CADDY CD1B conduit hanger used for?
The NVENT CADDY CD1B is a screw-on hanger designed to support 3/4 in trade size EMT or RMC conduit and cable. It is commonly used in commercial and industrial electrical installations to secure conduit runs to structural surfaces, with a load capacity of 50 lb.
What are the specifications of the NVENT CADDY CD1B?
The CD1B is a galvanized steel hanger with a gray finish, compatible with 3/4 in EMT and RMC conduit. It has a flange thickness of 3/4 in, a mounting hole diameter of 0.25 in, and accommodates cable diameters from 0.74 in to 1.05 in. It is cULus listed and made in the USA.
Where to buy the NVENT CADDY CD1B worldwide?
3G Electric supplies the NVENT CADDY CD1B conduit hanger to customers worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install the NVENT CADDY CD1B screw-on hanger?
To install the CD1B, position the hanger against the mounting surface, align the 0.25 in mounting hole, and secure with a screw or bolt. Ensure the conduit or cable is properly seated within the hanger's opening. Always follow local electrical codes and manufacturer guidelines for safe installation.
Digunakan dalam
Aplikasi umum untuk NVENT CADDYNVENT CADDY Produk
3G Electric memasok NVENT CADDY hangers for conduit & pipe. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
