NVENT CADDY Beam Clamp: Steel, 1/2 in, #10-1/4 Thread Size
The NVENT CADDY Beam Clamp (SKU 2KWY1) is a steel beam, wire rod, and purlin clamp with a corrosion-resistant coated finish. It features a 1/2 in beam flange thickness, #10-1/4 thread size, and a 100 lb load…
SKU 3G-OTH-04700
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The NVENT CADDY Beam Clamp (SKU 2KWY1) is a steel beam, wire rod, and purlin clamp with a corrosion-resistant coated finish. It features a 1/2 in beam flange thickness, #10-1/4 thread size, and a 100 lb load capacity. This top-mount, clamp-on unit includes a set screw and is designed for use with #10-24 electrical boxes and threaded rod. It is cULus listed.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the NVENT CADDY Beam Clamp used for?
The NVENT CADDY Beam Clamp is used to secure threaded rod and electrical boxes to steel beams in commercial and industrial installations. It supports up to 100 lb and is suitable for HVAC, plumbing, and electrical support systems where a top-mount, clamp-on attachment is required.
What are the specifications of the NVENT CADDY Beam Clamp?
This steel beam clamp has a 1/2 in beam flange thickness, #10-1/4 thread size, and 100 lb load capacity. It includes a set screw, features a corrosion-resistant coated finish, and is cULus listed. Compatible pipe size is 1/4 in, and it works with #10-24 electrical boxes and threaded rod.
Where to buy the NVENT CADDY Beam Clamp worldwide?
3G Electric supplies the NVENT CADDY Beam Clamp worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this cULus-listed clamp to any region.
How to install the NVENT CADDY Beam Clamp?
Position the clamp on the beam flange, tighten the set screw to secure it, then attach threaded rod or an electrical box to the #10-1/4 thread. Ensure the beam flange thickness does not exceed 1/2 in and the load stays under 100 lb. Follow standard safety practices for overhead support.
Digunakan dalam
Aplikasi umum untuk NVENT CADDYNVENT CADDY Produk
3G Electric memasok NVENT CADDY beam, wire rod & purlin clamps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
