NVENT ERICO Grounding Connector: Copper, 4 to 6 AWG SOL Grounding Wire Size
The NVENT ERICO EHL58G1K is a copper hammer-on ground rod clamp designed for use with a 5/8 in galvanized rod. It accommodates a single grounding wire sized 4 to 6 AWG SOL. This connector provides a secure mechanical…
SKU 3G-OTH-26552
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The NVENT ERICO EHL58G1K is a copper hammer-on ground rod clamp designed for use with a 5/8 in galvanized rod. It accommodates a single grounding wire sized 4 to 6 AWG SOL. This connector provides a secure mechanical connection for grounding applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the NVENT ERICO EHL58G1K hammer-on ground rod clamp used for?
The NVENT ERICO EHL58G1K is a copper hammer-on ground rod clamp used to connect a single 4 to 6 AWG solid copper grounding wire to a 5/8 in galvanized rod. It provides a secure mechanical connection for industrial grounding systems in electrical, telecom, and facility applications.
What are the specifications of the NVENT ERICO EHL58G1K ground rod clamp?
The NVENT ERICO EHL58G1K is a copper grounding connector for a 5/8 in galvanized rod. It accepts one solid grounding wire from 4 to 6 AWG. The hammer-on design ensures a tight mechanical bond without special tools. Manufacturer part number: EHL58G1K.
Where to buy the NVENT ERICO EHL58G1K ground rod clamp worldwide?
3G Electric supplies the NVENT ERICO EHL58G1K hammer-on ground rod clamp worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this copper grounding connector.
How to install the NVENT ERICO EHL58G1K hammer-on ground rod clamp?
To install the NVENT ERICO EHL58G1K, drive the clamp onto a 5/8 in galvanized rod using a hammer until it seats firmly. Insert the 4 to 6 AWG solid copper wire into the clamp opening and tighten the screw to secure the connection. Always follow local electrical codes for grounding.
Digunakan dalam
Aplikasi umum untuk NVENT ERICONVENT ERICO Produk
3G Electric memasok NVENT ERICO hammer on ground rod clamps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
