Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 2.5 mm Mill Dia, 2.2 mm LOC - Pencil-Neck Carbide Corner-Radius End Mills for Hardened Materials
OSGPencil-Neck Carbide Corner-Radius End Mills for Hardened Materials

OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 2.5 mm Mill Dia, 2.2 mm LOC

The OSG Corner Radius End Mill is a pencil-neck carbide end mill for hardened materials, featuring a WXS coating, 2 flutes, 2.5 mm mill diameter, 2.2 mm length of cut, and 0.2 mm corner radius (MPN 3102501). 3G…

SKU 3G-OTH-250783

Merek
OSG
Item
Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 2.5 mm Mill Dia, 2.2 mm LOC
Kategori
Pencil-Neck Carbide Corner-Radius End Mills for Hardened Materials
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyur
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Spesifikasi Teknis

OSG
Manufacturer Part Number
3102501
Type
WXS Coated
Mill Dia
2.5 mm
Flute
2
LOC
2.2 mm
Rad
0.2 mm
Lihat Lembar Spesifikasi Lengkap

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

OSG Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

The OSG Corner Radius End Mill is a pencil-neck carbide end mill for hardened materials, featuring a WXS coating, 2 flutes, 2.5 mm mill diameter, 2.2 mm length of cut, and 0.2 mm corner radius (MPN 3102501). 3G Electric sources this precision tool across 14 industrial departments, with specialist expertise in combustion, pumps, and controls ensuring accurate fulfillment.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

What is OSG corner radius end mill used for?

This OSG carbide end mill is designed for precision milling of hardened materials. The 0.2 mm corner radius strengthens the cutting edge to reduce chipping, while the WXS coating provides wear resistance for extended tool life in demanding applications.

What are the specifications of OSG 3102501 end mill?

The OSG 3102501 is a 2-flute, WXS-coated carbide corner radius end mill with a 2.5 mm mill diameter, 2.2 mm length of cut, and 0.2 mm corner radius. It is a pencil-neck design for reaching deep cavities in hardened steel and tool steel.

Where to buy OSG corner radius end mill worldwide?

3G Electric supplies the OSG 3102501 corner radius end mill to customers worldwide. We handle full logistics, customs clearance, and delivery to your facility. Contact our team for a quote and lead time on this precision carbide tool.

How to select the correct corner radius end mill for hardened steel?

Choose a carbide end mill with a small corner radius, like the OSG 0.2 mm radius, to prevent edge breakage on hardened materials. Match the mill diameter and length of cut to your cavity depth. A WXS coating improves heat resistance and tool life during hard milling.

Digunakan dalam

Aplikasi umum untuk OSG
Automotive engine block production — OSG micro drill bits for oil gallery and coolant passage drilling in cast iron
Medical device manufacturing — OSG micro drill bits for drilling bone screw pilot holes in stainless steel implants
Aerospace component machining — OSG micro drill bits for fastener holes in titanium alloy structural parts
Mold and die making — OSG micro drill bits for cooling channel drilling in hardened tool steel (HRC 45-50)
Electronics enclosure fabrication — OSG micro drill bits for precision holes in aluminum alloy housings (with appropriate coating selection)
General engineering job shops — OSG micro drill bits for small-diameter hole drilling in mild steel and alloy steel parts

OSG Produk

3G Electric memasok OSG pencil-neck carbide corner-radius end mills for hardened materials. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Produk serupa

Dicocokkan berdasarkan spesifikasi dan deskripsi
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 2.5 mm Mill Dia, 2.2 mm LOC, 0.2 mm Rad (MPN 3102502)
OSG
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 2.5 mm Mill Dia, 2.2 mm LOC, 0.2 mm Rad (MPN 3102502)
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 2 mm Mill Dia, 1.6 mm LOC, 0.3 mm Rad (MPN 3102015)
OSG
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 2 mm Mill Dia, 1.6 mm LOC, 0.3 mm Rad (MPN 3102015)
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 2.5 mm Mill Dia, 2.2 mm LOC, 0.2 mm Rad (MPN 3102503)
OSG
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 2.5 mm Mill Dia, 2.2 mm LOC, 0.2 mm Rad (MPN 3102503)
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 2 mm Mill Dia, 1.6 mm LOC, 0.5 mm Rad (MPN 3102024)
OSG
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 2 mm Mill Dia, 1.6 mm LOC, 0.5 mm Rad (MPN 3102024)
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 1.5 mm Mill Dia, 1.2 mm LOC, 0.2 mm Rad (MPN 3101503)
OSG
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 1.5 mm Mill Dia, 1.2 mm LOC, 0.2 mm Rad (MPN 3101503)
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 2 mm Mill Dia, 1.6 mm LOC, 0.5 mm Rad (MPN 3102020)
OSG
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 2 mm Mill Dia, 1.6 mm LOC, 0.5 mm Rad (MPN 3102020)

Lainnya dari OSG

Lihat semua OSG suku cadang →
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 3 mm Mill Dia, 2.5 mm LOC, 0.5 mm Rad (MPN 3103017)
OSG
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 3 mm Mill Dia, 2.5 mm LOC, 0.5 mm Rad (MPN 3103017)
OSG Corner Radius End Mill: Carbide, WXS Coated, 3 Flute, 2 mm Mill Dia, 3 mm LOC, 0.5 mm Rad (MPN 3097246)
OSG
OSG Corner Radius End Mill: Carbide, WXS Coated, 3 Flute, 2 mm Mill Dia, 3 mm LOC, 0.5 mm Rad (MPN 3097246)
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 2 mm Mill Dia, 1.6 mm LOC, 0.1 mm Rad (MPN 3102005)
OSG
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 2 mm Mill Dia, 1.6 mm LOC, 0.1 mm Rad (MPN 3102005)
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 2 mm Mill Dia, 1.6 mm LOC, 0.2 mm Rad (MPN 3102008)
OSG
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 2 mm Mill Dia, 1.6 mm LOC, 0.2 mm Rad (MPN 3102008)
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 2 mm Mill Dia, 1.6 mm LOC, 0.1 mm Rad (MPN 3102002)
OSG
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 2 mm Mill Dia, 1.6 mm LOC, 0.1 mm Rad (MPN 3102002)
OSG Corner Radius End Mill: Carbide, WXS Coated, 3 Flute, 2 mm Mill Dia, 3 mm LOC, 0.5 mm Rad (MPN 3097249)
OSG
OSG Corner Radius End Mill: Carbide, WXS Coated, 3 Flute, 2 mm Mill Dia, 3 mm LOC, 0.5 mm Rad (MPN 3097249)
OSG Corner Radius End Mill: Carbide, WXS Coated, 3 Flute, 2 mm Mill Dia, 3 mm LOC, 0.5 mm Rad (MPN 3097273)
OSG
OSG Corner Radius End Mill: Carbide, WXS Coated, 3 Flute, 2 mm Mill Dia, 3 mm LOC, 0.5 mm Rad (MPN 3097273)
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 3 mm Mill Dia, 2.5 mm LOC, 0.5 mm Rad (MPN 3103016)
OSG
OSG Corner Radius End Mill: Carbide, WXS Coated, 2 Flute, 3 mm Mill Dia, 2.5 mm LOC, 0.5 mm Rad (MPN 3103016)