PARGRIP Compression Fitting Cap: 1/4 in OD Size, Compression
The PARGRIP Compression Fitting Cap (MPN GCAP-4) is a PFA compression tube fitting with a 1/4 in OD size, from the Pargrip series. This FDA-approved cap is designed for use in compression fittings, providing a secure…
SKU 3G-OTH-474267
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARGRIP Compression Fitting Cap (MPN GCAP-4) is a PFA compression tube fitting with a 1/4 in OD size, from the Pargrip series. This FDA-approved cap is designed for use in compression fittings, providing a secure seal for tubing systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARGRIP Compression Fitting Cap GCAP-4 used for?
The PARGRIP GCAP-4 is a PFA compression fitting cap used to seal the end of a compression fitting in tubing systems. It is commonly applied in pharmaceutical, food processing, and chemical handling where FDA-approved materials are required for purity and corrosion resistance.
What are the specifications of the PARGRIP GCAP-4?
The PARGRIP GCAP-4 is a PFA compression fitting cap with a 1/4 in OD size, from the Pargrip series. It is FDA Approved and manufactured by PARGRIP under MPN GCAP-4. The cap is designed for compression-type fittings to provide a secure, leak-resistant seal.
Where to buy PARGRIP GCAP-4 compression fitting cap worldwide?
3G Electric supplies the PARGRIP GCAP-4 compression fitting cap worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this FDA-approved PFA cap for your tubing system needs.
How to install a PARGRIP compression fitting cap?
To install the PARGRIP GCAP-4 cap, first ensure the tubing end is cut square and free of burrs. Slide the cap onto the fitting body and tighten the nut finger-tight, then use a wrench for an additional 1/4 to 1/2 turn. Avoid over-tightening to prevent damage to the PFA material.
PARGRIP Produk
3G Electric memasok PARGRIP pfa compression tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
