PARGRIP Compression Fitting Cap: 1/2 in OD Size, Compression
The PARGRIP Compression Fitting Cap (MPN GCAP-8) is a PFA compression tube fitting with a 1/2 in OD size, part of the Pargrip series. It is FDA Approved, ensuring compliance for demanding industrial applications. 3G…
SKU 3G-OTH-474250
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARGRIP Compression Fitting Cap (MPN GCAP-8) is a PFA compression tube fitting with a 1/2 in OD size, part of the Pargrip series. It is FDA Approved, ensuring compliance for demanding industrial applications. 3G Electric interprets your demand for this genuine PARGRIP component and delivers it with specialist support across 14 industrial departments.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARGRIP Compression Fitting Cap GCAP-8 used for?
The PARGRIP GCAP-8 is a PFA compression fitting cap used to seal the end of a 1/2 in OD tube in high-purity fluid systems. It is FDA Approved, making it suitable for food, pharmaceutical, and semiconductor applications where chemical resistance and cleanliness are critical.
What are the specifications of the PARGRIP GCAP-8?
The PARGRIP GCAP-8 is a compression fitting cap with a 1/2 in OD size, made from PFA material. It is part of the Pargrip series and is FDA Approved. The manufacturer part number is GCAP-8. This component is designed for secure sealing in demanding industrial environments.
Where to buy PARGRIP GCAP-8 worldwide?
3G Electric supplies the genuine PARGRIP GCAP-8 compression fitting cap worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we interpret your demand and deliver this FDA Approved PFA component with specialist support across 14 departments.
How to install a PARGRIP PFA compression fitting cap?
To install the PARGRIP GCAP-8, ensure the tube end is clean and cut square. Slide the cap onto the tube and tighten the nut finger-tight, then use a wrench for an additional 1/4 to 1/2 turn. Avoid over-tightening to prevent damage to the PFA material. Always follow the manufacturer's guidelines for best results.
PARGRIP Produk
3G Electric memasok PARGRIP pfa compression tube fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









