PARKER Plug: Hex Drive Cored Plug, 3/8 in, NPT Threaded, 1,000 psi, 25/32 in Lg
The PARKER Hex Drive Cored Plug (MPN VS218P-6) is a 3/8 in NPT threaded high-pressure pipe fitting made from C36000 brass, with a maximum operating pressure of 1,000 psi and a length of 25/32 in. 3G Electric…
SKU 3G-OTH-467881
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Hex Drive Cored Plug (MPN VS218P-6) is a 3/8 in NPT threaded high-pressure pipe fitting made from C36000 brass, with a maximum operating pressure of 1,000 psi and a length of 25/32 in. 3G Electric interprets demand and delivers this genuine industrial fitting across 14 departments — and far more — with specialist depth in combustion, pumps and controls as an authorised distributor for brands like Parker, Schneider, ABB, Siemens, SKF, Festo, Fluke, Interpump and FBR.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER VS218P-6 hex drive cored plug used for?
The PARKER VS218P-6 is a 3/8 in NPT threaded high-pressure pipe fitting used to seal ports in hydraulic and pneumatic systems. It is made from C36000 brass and rated for 1,000 psi, making it suitable for industrial fluid power applications where a reliable, leak-proof seal is required.
What are the specifications of the PARKER VS218P-6 plug?
The PARKER VS218P-6 is a hex drive cored plug with 3/8 in NPT threads, a maximum operating pressure of 1,000 psi, and a length of 25/32 in. It is constructed from C36000 brass and comes with factory-applied sealant for immediate installation.
Where to buy PARKER VS218P-6 in worldwide?
3G Electric supplies the PARKER VS218P-6 hex drive cored plug to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine PARKER fittings and support your procurement across 14 departments.
How to install a PARKER hex drive cored plug?
To install the PARKER VS218P-6, clean the female NPT port threads, apply a compatible thread sealant if not pre-coated, and tighten the plug with a hex key to the manufacturer's recommended torque. Avoid over-tightening to prevent thread damage. Always verify pressure rating compatibility before installation.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER threaded high-pressure pipe fittings with sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









