PARKER Compression Fitting Elbow: 3/8 in OD x 1/2 in Pipe size, 1/2-14 Thread Size
The PARKER Compression Fitting Elbow (MPN 6-8 CBU-SS) is a flareless bite-type stainless steel fitting in the Ferulok series, sized for 3/8 in OD tube x 1/2 in pipe with a 1/2-14 thread. 3G Electric interprets this…
SKU 3G-OTH-478920
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The PARKER Compression Fitting Elbow (MPN 6-8 CBU-SS) is a flareless bite-type stainless steel fitting in the Ferulok series, sized for 3/8 in OD tube x 1/2 in pipe with a 1/2-14 thread. 3G Electric interprets this demand and sources the genuine PARKER part, backed by specialist expertise in fluid controls across 14 industrial departments.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the PARKER 6-8 CBU-SS compression fitting elbow used for?
The PARKER 6-8 CBU-SS is a flareless bite-type stainless steel compression fitting elbow used to connect 3/8 in OD tubing to 1/2 in pipe in high-pressure fluid systems. It is common in hydraulic, pneumatic, and instrumentation applications where leak-free performance is critical.
What are the specifications of the PARKER Ferulok 6-8 CBU-SS?
The PARKER Ferulok 6-8 CBU-SS is a stainless steel compression fitting elbow with a 3/8 in OD tube size and 1/2 in pipe size. It has a 1/2-14 thread size and is part of the Ferulok series. The manufacturer part number is 6-8 CBU-SS.
Where to buy PARKER 6-8 CBU-SS compression fittings worldwide?
3G Electric supplies the genuine PARKER 6-8 CBU-SS compression fitting elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this Ferulok series stainless steel fitting.
How to install a PARKER Ferulok flareless compression fitting?
To install a PARKER Ferulok fitting, slide the nut and ferrule onto the tube, insert the tube into the fitting body until it bottoms out, then tighten the nut to the recommended torque. The bite-type ferrule grips the tube without flaring, creating a leak-tight seal. Always follow PARKER's installation instructions.
Digunakan dalam
Aplikasi umum untuk PARKERPARKER Produk
3G Electric memasok PARKER flareless bite-type stainless steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









